Winter drags

[Crampy]

hehe i blew tha buttocks out of my turbo!!

o that would explain ur boost levels, howd u do that? broke the shaft? it wasnt ceramic was it?

na not ceramic, it has bent the shaft and hit the compressor housing, its poked.

umm, how did that happen?

I did a burnout lots of smoke and plenty of boost, when i hit second gear and started to take off it just made a pswchuuuu noise and that was it no more boost.

ill have to rebuild as there is no other turbo that will fit using my manifold and plumbing setup with out major $$ but ill try and get a bigger comp housing in there if i can.
I
m really over it right now and very close to saying F it and getting a drift car, but ill still have headaches so its gonna sit in the corner for a bit till i can be bothered with it 4 a while

What sort of turbo is it?

[tsoob]

skyline exhaust housing, bigger front wheel i got it from mjrstar it was his old one and the perfect size for my car.
It just didnt like making 17 pounds all the time, i really wont ot run 18 or 19 but i just dont know if it will hold it.

[Crampy]

Chuck a RX7 HT18 at it and get the Skyline exhaust housing machined. that's what my car has got.

[escortman]

i would suggest a td05h 20g like mine seems to produce good power, but no actual proof yet haha

[method]

Chuck a RX7 HT18 at it and get the Skyline exhaust housing machined. that's what my car has got.

same here, works real well

[Bazda]

Chuck a RX7 HT18 at it and get the Skyline exhaust housing machined. that's what my car has got.

His turbo is equivalent to the HT18 already.

[tsoob]

Chuck a RX7 HT18 at it and get the Skyline exhaust housing machined. that's what my car has got.

His turbo is equivalent to the HT18 already.

except its smashed

[loose_unit]

I run an old T3 out of an early single turbo 300zx, 60 trim front wheel in my starlet, been reliable as, run 18 psi for the last year, and doesnt seem to mind 20 psi either.