Toyspeed.org.nz Message Board

by **Fortyone.co.nz** » Wed Apr 30, 2008 12:18 pm

Right we have 2 sets of these on the boat, ETA 5 weeks (via Squidney, meh!) and need to clear them at a special price! Front 8kg Rear 6kg, -52mm to +32mm front, -32mm to +23mm rear, comes with Trust produced spindles. These coilovers received a very positive review by JDM Option (before the site got re-jigged - cannot find it!) but overall the handling was superb.

They are $2999 / kit. Yep approx half the price of the car and that's why we're bringing over 2, not 10 =]

Mac
mac@fortyone.co.nz
http://www.fortyone.co.nz
64 4 566 1007

by **stalker** » Thu May 01, 2008 1:59 am

*coughspougecough*

So are these just a direct "bolt-in" kit that has everything needed??

by **Fortyone.co.nz** » Thu May 01, 2008 9:49 am

stalker wrote:*coughspougecough*

So are these just a direct "bolt-in" kit that has everything needed??

Yes sir!

OMG so shiny! · by **Dell'Orto** » Thu May 01, 2008 12:34 pm

Not cheap, but I'm willing to put money on the fact they are about 10x better than something someone here has knocked up except my Koni ones, cause they rule.
When they arrive I'd be quite keen to see some close up pics of them.

by **Fortyone.co.nz** » Thu May 01, 2008 12:43 pm

I'd be willing to bet they're better value for money still than the Daiyamas, at a 1/3 the price!

by **Fortyone.co.nz** » Wed Sep 10, 2008 10:14 pm

Whilst there has been no public confirmation, we have had confirmation behind the scenes that Trust is, um, halted business.

OMG so shiny! · by **Dell'Orto** » Thu Sep 11, 2008 12:03 am

No more Performanced by Trust???

by **Fortyone.co.nz** » Thu Sep 11, 2008 12:05 am

There's different meanings for different things in Japan, there *should* be, it's not like NZ where if you're gone you're gone!

by **rolla_fxgt** » Thu Sep 11, 2008 1:50 pm

Fortyone.co.nz wrote:Whilst there has been no public confirmation, we have had confirmation behind the scenes that Trust is, um, halted business.

Its been confirmed by Autoblog, apparently $60 million in debt and has filed for bankruptcy. Apparently more are due to do the same due to the bad sales market at the moment & Japanese youth not buying cars as much now.

by **Fortyone.co.nz** » Thu Sep 11, 2008 2:53 pm

It's more than 60million =] That is Yen by the way... a lot more..

by **americ_ian** » Tue Sep 23, 2008 8:13 pm

and i was saving my pennies for these :-(

by **bluemaumau** » Tue Sep 23, 2008 9:37 pm

knockoff stuff squeezing thier balls

by **Fortyone.co.nz** » Tue Sep 23, 2008 9:53 pm

They're still available, Bankrupt in Japan essentially means you can hold off people you owe money to, restructure and still retail the same wares. It's more poor investment options and a bloated business model that is killing them, quality will always sell fortunately!

by **stalker** » Wed Mar 18, 2009 9:58 am

Price check on the above kit??

by **Fortyone.co.nz** » Wed Mar 18, 2009 10:26 am

Grab your ankles! $4495 + shipping, EMS Air is about $700, Ocean (container) around $180

by **stalker** » Wed Mar 18, 2009 2:06 pm

by **Fortyone.co.nz** » Tue May 17, 2011 1:15 pm

Bumping this up with a good option (x2!!) from the US - Stance Coilovers. Made by HSD in Sth Korea. Solid manufacturer, thick shock body for strength and durability, the two options are:

GR+ - comes with full Spindle - 8k/6k - $2999 delivered
# 15-Way Damping Adjustable
# Upper Pillowball Bearing Adjustable Camber Uppermount
# Upper Pillowball Bearing Pillowball Uppermount
# Spring Cold Wound Linear Spring
# Monotube Inverted Monotube Shocks
# Dustboot Dustboot
# Collar Aluminum Collars & Upper Mounts
# Bracket Height Adjustable Lower Bracket

XR - comes with weld on spindle adapter - 8k/6k - $3931 delivered
# 12-Way Damping Adjustable
# Upper Pillowball Bearing Adjustable Camber Uppermount
# Upper Pillowball Bearing Pillowball Uppermount
# feat_spring-swift SWIFT Spring
# feat_monotube-swift Inverted Monotube Shocks
# Boot Dustboot
# Collar Aluminum Collars & Upper Mounts
# Bracket Height Adjustable Lower Bracket
# Bracket Helper Spring

by **d1 mule** » Sat May 21, 2011 1:35 am

look just like HSD, made by HSD, but twice the price of HSD, hmmmmmm

by **Fortyone.co.nz** » Sat May 21, 2011 9:38 am

Indeed however the difference between brands which HSD make for are the custom build requirements especially piston thickness! Standard off-the-shelf HSD kits differ here. 43mm vs 52mm

Toyspeed.org.nz Message Board

Fortyone.co.nz - Trust / Greddy Thread - AE86 Coilovers

Fortyone.co.nz - Trust / Greddy Thread - AE86 Coilovers

Who is online