Anyone want Sheetmetal Work Or Powdercoating

[Mr. Mainstream]

Quiet At Work So If Anyone Would Like any sort of sheetmetal work done eg Airbox, panels, bench covers, shelves etc etc am able to do cheap Stainless, galv, Marine grade most types of metal up to 3mm-3.5mm with full access to CNC tools.

Can also Powdercoat to a high standard anything unless crazy long. black and white cheap. other colours are at a slight premium. willing to acid wash but up to you to prep/blast.
gimme yell if wanna grab some off-cuts/scrap etc also

Slide Me A PM

[repowered]

hey I have a bit of checker plate (about 280x170) filling in a gap in my dashboard where the stereo and ash tray went. i currently have it mounted in the glovebox. reckon you could weld some mounts to the back of the peice of checker plate and cut a hole for the head unit.

maybe give you the bit of checkerplate and dimentions of head unit? should really make some mount to attach it to the dash frame to support it properly but mite b ok without it, and you would need to have the car for that. carsa ke30 corolla

[Bling]

Cut the hole with a grinder and fix it in place with come Velcro strips.

Thats how i'd rangi it up anyway

[repowered]

haha yea rangai alright, its rangi enough in the glove box as it is!

[repowered]

cheers for doing that mainstream was tidy mint as job. Just need to do that other bit i PM'd you about hope you can help.

[Mr. Mainstream]

Hey guys back and work and have a bit of time on hands for off-job. PM or txt any sheetmetal needs

[frost]

hey I have a bit of checker plate (about 280x170) filling in a gap in my dashboard where the stereo and ash tray went.

haha i have the exact same scenario in my 85levin. checker plate is so 2001

[Mr. Mainstream]

it does the job

[4-AGE 4-LIFE]

Are you able to make manifold flanges? 10mm steel?

[crispy'86]

For that, depending on exactly what engine it's for, you might be able to get something like that through either Autobend or Chase exhaust supplies

[Mr. Mainstream]

10mm steel exhaust flange?

[hsmidy]

wouldnt happen to be handy when it comes to drop tanks would ya?

[4-AGE 4-LIFE]

I need to get 3 flanges made, i have gaskets for all of them for sample sizing.

1 is a turbo > manifold flange vf10 turbo.
the other is, manifold > head flange, 4 cyl 2.0l

[Mr. Mainstream]

I need to get 3 flanges made, i have gaskets for all of them for sample sizing.

1 is a turbo > manifold flange vf10 turbo.
the other is, manifold > head flange, 4 cyl 2.0l

yeah should be able to do, what thickness and material?

[4-AGE 4-LIFE]

10mm, just mild steel. if thats what it is called.

ive actually changed my design again.

i only need the turbo > manifold flange made.

when and where can i drop the gasket off to you

[Mr. Mainstream]

dont deal with metal 10mm thick. we do 1.6mm to 3-5mm., i work 2;30-1030pm in ricc

[Bling]

Au bro just glue 2 5mil bits together

[Mr. Mainstream]

Au bro just glue 2 5mil bits together

thanks bud

[Dirtbag]

Are you able to mod an already existing catch can? I am not sure at all of the internal structure, would like to check if a baffle is in there and then add steel wool and possible get a bracket added to it?

[Mr. Mainstream]

have sent PM . sorry if i havnt replied to any PM's as my inbox was full . please resend.