Toyspeed.org.nz Message Board

by **Bazda** » Mon Dec 15, 2008 6:14 pm

http://nzhondas.com/forum/general-discussion/85227-playday-pukekohe-feb-2009-a.html

by **groupagt4** » Mon Dec 15, 2008 8:54 pm

so gonna try and make this one

by **cat007** » Tue Dec 16, 2008 8:06 pm

Sounds awesome! I'll make sure my little toy's all ready to go.....

by **Bazda** » Tue Dec 16, 2008 8:46 pm

make sure you enter asap, playday usually fills up REALLY fast!!
I'll be paying mine this week.

by **cat007** » Tue Dec 16, 2008 8:58 pm

Bazda wrote:make sure you enter asap, playday usually fills up REALLY fast!!
I'll be paying mine this week.

Ah - I wont have the money spare until end of Jan - bugger.....

by **Bazda** » Tue Dec 16, 2008 9:07 pm

cat007 wrote:
Bazda wrote:make sure you enter asap, playday usually fills up REALLY fast!!
I'll be paying mine this week.

Ah - I wont have the money spare until end of Jan - bugger.....

There could be spots left, peopel still on holiday etc, cars not ready etc. so you might be lucky

by **groupagt4** » Tue Dec 16, 2008 9:36 pm

i cant find the entry form

by **Bazda** » Tue Dec 16, 2008 10:11 pm

You have to go to the playday website, and go to the contacts section and fill out the your details etc, and write in the comments box you want to register got the pukekohe playday 9th feb, and they will send you all the info.

by **Bazda** » Wed Jan 21, 2009 8:45 am

Only a few weeks left.
Hope my engine and box is back together! touch wood.

by **cat007** » Wed Jan 21, 2009 9:08 am

Bazda wrote:Only a few weeks left.
Hope my engine and box is back together! touch wood.

My box is STILL not back together so I doubt I'll be going

by **Bazda** » Wed Jan 21, 2009 10:39 am

cat007 wrote:
Bazda wrote:Only a few weeks left.
Hope my engine and box is back together! touch wood.

My box is STILL not back together so I doubt I'll be going

Thats no excuse!
My engine is on en engine stand still needing to be taken apart to change the head gasket, skim the head, lap the valves back in, new stem seals, reset 20 tappets. put back together.
Pull apart my box, change the syncros, change all the bearings and put back together.
Then installed into my car.
Then have to machine some new discs up and install new pads.
Then put it all into the car!
all before the 9th..

by **cat007** » Wed Jan 21, 2009 10:47 am

Bazda wrote:
cat007 wrote:
Bazda wrote:Only a few weeks left.
Hope my engine and box is back together! touch wood.

My box is STILL not back together so I doubt I'll be going

Thats no excuse!
My engine is on en engine stand still needing to be taken apart to change the head gasket, skim the head, lap the valves back in, new stem seals, reset 20 tappets. put back together.
Pull apart my box, change the syncros, change all the bearings and put back together.
Then installed into my car.
Then have to machine some new discs up and install new pads.
Then put it all into the car!
all before the 9th..

That's also no excuse!! I could do all that work before the 9th

But finding out where a mystery clip goes.....that's another story LOL

by **Bazda** » Wed Jan 21, 2009 11:57 am

cat007 wrote:
Bazda wrote:
cat007 wrote:
Bazda wrote:Only a few weeks left.
Hope my engine and box is back together! touch wood.

My box is STILL not back together so I doubt I'll be going

Thats no excuse!
My engine is on en engine stand still needing to be taken apart to change the head gasket, skim the head, lap the valves back in, new stem seals, reset 20 tappets. put back together.
Pull apart my box, change the syncros, change all the bearings and put back together.
Then installed into my car.
Then have to machine some new discs up and install new pads.
Then put it all into the car!
all before the 9th..

That's also no excuse!! I could do all that work before the 9th

But finding out where a mystery clip goes.....that's another story LOL

still that clip!! you should take it to my dad.
He knows those boxes quite well as he runs them on his cossie.

by **cat007** » Wed Jan 21, 2009 12:16 pm

where's he located? Can I contact him?

by **Bazda** » Wed Jan 21, 2009 12:39 pm

cat007 wrote:where's he located? Can I contact him?

Takapuna, Barrys point rd

489 8998 Bruce.

by **2jayzgte** » Wed Jan 21, 2009 1:52 pm

There is also a GTR track-day at Taupo on the 9th of FEB on the A1 configured track lots of good cars entered.I'm unsure of how many spots are left though www.gtr-elite.com and follow your nose.

by **Bazda** » Wed Jan 21, 2009 2:24 pm

Taupo is so far lol, I was there a bit end of last year, so keen to get back to pukekohe the crazy speed track.

There is also another track day on the 28th Feb held by some car club at puke (I have the entry forms with me here) So if I dont make the play day i'll enter that one.

by **postfach** » Wed Jan 21, 2009 2:51 pm

Hmmmmmm.....I may have to seriously consider this....

by **cat007** » Fri Feb 06, 2009 10:19 am

Bazda wrote:
cat007 wrote:where's he located? Can I contact him?

Takapuna, Barrys point rd

489 8998 Bruce.

Thanks - but even he couldn't help! Suggested it might be used as a spacer - but after having another look, it wont fit anywhere as a spacer

bah - I'm just going to put it back together - Maybe it slipped into my parts box somehow.....

by **Bazda** » Fri Feb 06, 2009 10:47 am

yea maybe it did slip in from somewhere else lol.

You will soon see i guess....

Anyhow I wont be attending this day, i'll go to the next playday at puke later this year. around march/april.

Toyspeed.org.nz Message Board

Playday On track at Pukekohe Feb 9th

Playday On track at Pukekohe Feb 9th

Who is online