Toyspeed.org.nz Message Board

by **ke_25** » Fri Apr 24, 2009 4:16 pm

Hey

looking at getting soe bigger injectors for 4age blacktop,

and was going to try and retain to use the factory rail to save making up a new fuel rail with extrusion etc,

just contacted redline and there a various sid efeed injector listings, and was wondering which engines you know fit into teh 20v rail?

looking for around teh 800cc mark.

Cheers Shaun

by **sergei** » Fri Apr 24, 2009 4:32 pm

3rd gen 3SGTE might fit

by **TRD_ZERO** » Fri Apr 24, 2009 5:32 pm

They do but they are only 550.

by **sergei** » Fri Apr 24, 2009 5:49 pm

TRD_ZERO wrote:They do but they are only 550.

Only?
What sort of power is he aiming?
550 is well enough for 200-250 kw.
EDIT: Ahh stupid me, didn't RTFP, he is after 800cc....

by **AceSniper** » Fri Apr 24, 2009 6:31 pm

sard do them, 3sgte, 1jzgte, 2jzgte vvti

by **gasman** » Fri Apr 24, 2009 7:20 pm

sarf 800cc, $225 each from redline

by **frost** » Fri Apr 24, 2009 10:29 pm

bloody hell 800cc for a blacktop. how much boost are you going to run?

by **matt dunn** » Fri Apr 24, 2009 10:48 pm

I ran 550's now run the 800's

The 550's are a bit small if you want to do too much,
I was at the limit on them with my 1600 motor.

and the 800's are probably too big, as still lots left in them at 500hp,
but they dont seem to have idle problems, so their being too big does not seem to be a problem.

by **rollaholic** » Fri Apr 24, 2009 10:50 pm

frost wrote:how much boost are you going to run?

ahh... all of it, i think

by **ke_25** » Sat Apr 25, 2009 2:05 am

AceSniper wrote:sard do them, 3sgte, 1jzgte, 2jzgte vvti

do they have to be vvti? teh ones on redline suit 1j/ej20t and 2j/ej20t?... any help. just dont wnat to get the wrong ones, as could be expensive mistake!!

by **ke_25** » Sat Apr 25, 2009 2:06 am

frost wrote:bloody hell 800cc for a blacktop. how much boost are you going to run?

yeah i want to push a descent amount of boost, black has been build with ross pistons and spool rods etc, so want to see what i can get out of it. wont be massive power, only runnign a gt2871r, but yeah just dont want to falk out and have to buy more injectors later.

by **AceSniper** » Sat Apr 25, 2009 12:02 pm

what part numbers have you been given?

SARD 800cc Injector 63564
(Injectors) ¥9,384 (Sale) ¥8,663
Side feed, high impedance. 2 hole. Lag time: 1.6msec.

by **AceSniper** » Sat Apr 25, 2009 12:04 pm

8663 yen + shipping prob be cheaper than redline?

http://www.greenline.jp/catalogue/bccat ... ory=engine

by **TRD_ZERO** » Sat Apr 25, 2009 12:20 pm

rollaholic wrote:
frost wrote:how much boost are you going to run?

ahh... all of it, i think

Classic!!

by **ke_25** » Sat Apr 25, 2009 12:39 pm

yeah i can get for around 205inc from redline for the ones from a 1j.

by **matt dunn** » Sat Apr 25, 2009 12:44 pm

1jz and 2jz non vvt ones fit straight into the 20V,

Toyspeed.org.nz Message Board

INJECTORS 20v 4a

INJECTORS 20v 4a

Who is online