aw11 oil cooler

[jakesae101]

i have a factory oil cooler off an aw11 now if i use the 4age bigports oil cooler adapter plater off the aw11 motor will it fit on my afm 4agze motor but where do i put the return line as the aw11 has the return into the sump ?

[jakesae101]

anyone at all

[no_8wire]

The easiest way would be to have a return welded into the spare sump either by a mate or at a fabricators. Then you can swap over the sumps and install the water cooler etc.

Thats how I would attack it anyway.
Your aw11 a auto or manual?

[jakesae101]

should have said its going into my ae92 gtz but the oil cooler is out of a aw11 i can get the sump of the bigport motor but dont really have the gear to swap sumps