Custom water lines

General discussions on all non technical car related topics

Moderator: The Mod Squad

Custom water lines

Postby cat007 » Tue Jun 23, 2009 10:08 pm

Hey all

I'm wanting to replace most to all of the radiator water lines and heater water lines on my Hiace as they're all hard and crunchy and I'd rather they didn't burst.

I'm wanting mainly the hoses found on this page:

http://www.toyodiy.com/parts/p_G_1987_T ... _8716.html

I've spoken to Toyota and they want $60-$140 per hose - and there's 5 of them so don't really want to do that. And they don't have them in the country....

I've tried going through Partmaster but I was only able to get the top radiator hose from them - maybe I need to sit down and go through them all with them.....

Does anyone else have any suggestions? Maybe getting hoses made up is cheaper than I'm imagining?

Any help would be greatly appreciated!!

Cheers

Hunt
1:15.4 around Pukekohe
13.63 @ 169kmph at Meremere
Fastest MK3 at Suprafest 08
1G-GTE - Stinger 4424, T04B 60-1, 440cc injectors - 240rwkw @ 16psi
User avatar
cat007
Toyspeed Member
 
Posts: 3577
Joined: Sun Sep 01, 2002 7:29 pm

Postby slammed_integral » Wed Jun 24, 2009 12:18 am

super cheap has radiator hoses, try them
http://www.cardomain.com/id/slick_ep

there is nothing sour cola worms cant fix...
User avatar
slammed_integral
Toyspeed Member
 
Posts: 306
Joined: Sun Dec 05, 2004 10:27 pm
Location: Auckland

Postby cat007 » Wed Jun 24, 2009 11:31 am

slammed_integral wrote:super cheap has radiator hoses, try them


Albany didn't have anything last I checked - but I'll check the Wairau one when I'm next in there. Thing is, it's not the generic radiator hoses that Supercheap seem to stock - its the strange heater hoses, which they don't appear to stock....
1:15.4 around Pukekohe
13.63 @ 169kmph at Meremere
Fastest MK3 at Suprafest 08
1G-GTE - Stinger 4424, T04B 60-1, 440cc injectors - 240rwkw @ 16psi
User avatar
cat007
Toyspeed Member
 
Posts: 3577
Joined: Sun Sep 01, 2002 7:29 pm

Postby RomanV » Wed Jun 24, 2009 12:44 pm

They usually have a bin full of odds and sodds, good for if you're piecing together a car that doesnt have a standard radiator hose at all.

If you take your other pipe(s) down and have a rummage around, you'll most likely be able to come up with something that fits, even if it's two sections joined together.
User avatar
RomanV
Toyspeed Member
 
Posts: 4915
Joined: Wed Aug 13, 2003 12:17 am
Location: West Auckland

Postby cat007 » Wed Jun 24, 2009 12:47 pm

RomanV wrote:They usually have a bin full of odds and sodds, good for if you're piecing together a car that doesnt have a standard radiator hose at all.

If you take your other pipe(s) down and have a rummage around, you'll most likely be able to come up with something that fits, even if it's two sections joined together.


Good point - except I DO have standard radiator hoses - dammit! lol

I'll have a look - but not really wanting to use 2 separate hoses per piece....especially when there's 5 hoses I need....

That's 10 hoses - and probably about $20 a hose....kinda adds up lol
1:15.4 around Pukekohe
13.63 @ 169kmph at Meremere
Fastest MK3 at Suprafest 08
1G-GTE - Stinger 4424, T04B 60-1, 440cc injectors - 240rwkw @ 16psi
User avatar
cat007
Toyspeed Member
 
Posts: 3577
Joined: Sun Sep 01, 2002 7:29 pm

Postby GTCRSHR » Wed Jun 24, 2009 4:30 pm

Repco in mt wellington, i had to get some weird one and they had it was 60 bucks tho ... it was 120 before i asked for a discvcount
Nothing to see here ...
User avatar
GTCRSHR
Toyspeed Member
 
Posts: 1897
Joined: Thu Jan 16, 2003 2:14 pm
Location: Auckland NZ

Postby DRFTIN » Wed Jun 24, 2009 5:49 pm

are super cheap/repco/partsmaster to useless to look up their computer and get something in from another branch or a supplier?
just because they dont have it in that branch doesnt mean they dont exist

heater hoses might be hard to get from those kind of places but if they cant do radiator hoses theres something wrong
User avatar
DRFTIN
Toyspeed Member
 
Posts: 1106
Joined: Tue Nov 19, 2002 6:39 pm
Location: Chch

Postby 85AW20v » Wed Jun 24, 2009 10:38 pm

Have you emailed Manawatu Toyota as per the sponsors section? Will definitely get them cheaper for you than off your local dealer. You'll still have the wait but at least you'll know they're the right hoses.
See ya

Simon
85 MR2 20v
User avatar
85AW20v
Toyspeed Member
 
Posts: 1059
Joined: Fri May 24, 2002 6:18 pm
Location: Taupo, NZ

Postby Mr Revhead » Wed Jun 24, 2009 10:56 pm

you are after heater hoses......
they are smaller than rad hoses
should be able to buy lengths from any parts store
the only place you will get the moulded ones is toyota
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby cat007 » Wed Jun 24, 2009 11:00 pm

Simon85MR220v wrote:Have you emailed Manawatu Toyota as per the sponsors section? Will definitely get them cheaper for you than off your local dealer. You'll still have the wait but at least you'll know they're the right hoses.


Nah - I guess I could try and see what the prices are like...

Cheers :)
1:15.4 around Pukekohe
13.63 @ 169kmph at Meremere
Fastest MK3 at Suprafest 08
1G-GTE - Stinger 4424, T04B 60-1, 440cc injectors - 240rwkw @ 16psi
User avatar
cat007
Toyspeed Member
 
Posts: 3577
Joined: Sun Sep 01, 2002 7:29 pm

Postby 0EBUNY » Mon Jun 29, 2009 10:13 am

Mr Revhead wrote:you are after heater hoses......
they are smaller than rad hoses
should be able to buy lengths from any parts store
the only place you will get the moulded ones is toyota


yea heater hose comes by the meter any repco store will stock it u just need to know how much u need in total and the size of the hose. will work out cheaper than the hoses on that link.
new project
1998 toyota altezza :D where do i start plans go for miles
0EBUNY
Toyspeed Member
 
Posts: 74
Joined: Sun Sep 22, 2002 11:06 pm
Location: Hamilton

Postby cat007 » Mon Jun 29, 2009 10:49 am

0EBUNY wrote:
yea heater hose comes by the meter any repco store will stock it u just need to know how much u need in total and the size of the hose. will work out cheaper than the hoses on that link.


thanks for that. I'm going to PartMaster this sat to go through their 'new' book and see what hoses they can get me

Otherwise I'll probably just have to use regular heater hose - assuming the bends aren't too tight...
1:15.4 around Pukekohe
13.63 @ 169kmph at Meremere
Fastest MK3 at Suprafest 08
1G-GTE - Stinger 4424, T04B 60-1, 440cc injectors - 240rwkw @ 16psi
User avatar
cat007
Toyspeed Member
 
Posts: 3577
Joined: Sun Sep 01, 2002 7:29 pm


Return to General Car Discussion

Who is online

Users browsing this forum: Google [Bot] and 7 guests