looking to upgrade to 500cc+, after some suggestions as to what injectors will work with little or no modification and other standard vehicles. so far i only know about the later 3sgte 540's that will go in.... any others? anyone know about Rx7 550cc ones?
cheers
lucas
what injectors work? 3sgte
Moderator: The Mod Squad
10 posts
• Page 1 of 1
what injectors work? 3sgte
by lucasthefallen » Sun Jul 05, 2009 11:22 pm
Need Service or Repair work done? send me a PM
- lucasthefallen
- Toyspeed Member
- Posts: 425
- Joined: Tue Mar 01, 2005 8:02 am
- Location: Auckland
by ke_25 » Sun Jul 05, 2009 11:58 pm
prty suree 1j and 2j vvti ones also work as just purchased some sard ones for these that fit 20v 4a, which also suit 3sgte
PRESENT: KE35 Sr coupe (4agte project), GTS-T, MX40 Cressida coupe
EX:KE25 SL Coupe, KE30 4 door, KP61 4 door hatch, KE36 2 Door Wagon, AE70 2 Door Sedan, AE101 FXGT
EX:KE25 SL Coupe, KE30 4 door, KP61 4 door hatch, KE36 2 Door Wagon, AE70 2 Door Sedan, AE101 FXGT
- ke_25
- Toyspeed Member
- Posts: 328
- Joined: Sun Jul 11, 2004 4:44 pm
- Location: WGTN
by Akane » Mon Jul 06, 2009 2:49 am
USDM 2JZ-GTE indigo top works. I have a set for sale. PM me if needed.
No "stance", no "hellaflush", none of that bullshit. Nothing but no grip on full boost.
http://www.lol.co.nz/ random shit.
http://www.lol.co.nz/ random shit.
-
Akane - Toyspeed Member
- Posts: 4073
- Joined: Tue May 14, 2002 2:08 am
- Location: Auckland
by iOnic » Mon Jul 06, 2009 12:43 pm
Gen 3 3S-GTE and USDM 2JZ-GTE are the only 500cc+ injectors that drop into the factory rail and use the factory wiring.
RX7 850cc injectors fit the stock rail as well with slight modification
RX7 850cc injectors fit the stock rail as well with slight modification
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
-
iOnic - Toyspeed Member
- Posts: 3736
- Joined: Fri Jun 25, 2004 6:31 pm
- Location: Melbourne VIC
by ROBODISCO_20v » Thu Jul 09, 2009 2:43 pm
-
ROBODISCO_20v - Toyspeed Member
- Posts: 599
- Joined: Tue Jan 28, 2003 12:49 pm
- Location: Manukau Toyota - Parts Dept
by iOnic » Thu Jul 09, 2009 2:45 pm
Those won't fit an SW20 Turbo fuel rail and $750 is a lot to pay for injectors that flow less than JZA80/SW20 Gen3 items that can all be picked up for half that and are a direct "drop in" fitment.
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
-
iOnic - Toyspeed Member
- Posts: 3736
- Joined: Fri Jun 25, 2004 6:31 pm
- Location: Melbourne VIC
by tsoob » Mon Jul 13, 2009 10:59 am
use evo ones 550cc
Platinum Wheels
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
-
tsoob - Toyspeed Member
- Posts: 3253
- Joined: Tue Dec 05, 2006 7:37 pm
- Location: 201.1kw on 19psi
by iOnic » Mon Jul 13, 2009 11:32 am
iOnic wrote:Gen 3 3S-GTE and USDM 2JZ-GTE are the only 500cc+ injectors that drop into the factory rail and use the factory wiring.
Evo injectors don't fit 3SGTE fuel rails...They're top fed
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
-
iOnic - Toyspeed Member
- Posts: 3736
- Joined: Fri Jun 25, 2004 6:31 pm
- Location: Melbourne VIC
by tsoob » Mon Jul 13, 2009 6:19 pm
iOnic wrote:iOnic wrote:Gen 3 3S-GTE and USDM 2JZ-GTE are the only 500cc+ injectors that drop into the factory rail and use the factory wiring.
Evo injectors don't fit 3SGTE fuel rails...They're top fed
my bad just the number 550 popped into my head.
Platinum Wheels
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
-
tsoob - Toyspeed Member
- Posts: 3253
- Joined: Tue Dec 05, 2006 7:37 pm
- Location: 201.1kw on 19psi
by Prymal » Tue Jul 14, 2009 8:32 pm
what rail are you using? and for what engine
gen2 3sgte rail + gen3 540cc's work but the rail itself is a problem - it doesnt carry enough volume for bigger flow ..
You will need to rebore , duel feed , or adust accordingly ..
gen2 3sgte rail + gen3 540cc's work but the rail itself is a problem - it doesnt carry enough volume for bigger flow ..
You will need to rebore , duel feed , or adust accordingly ..
- Prymal
- Toyspeed Member
- Posts: 726
- Joined: Thu Jul 13, 2006 11:17 pm
- Location: Auckland
10 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 10 guests