Fan switch

[Rob]

Anyone out there got a schematic diagram for 20v blacktop?

My fan runs constantly since I checked my air filter (odd I know but the loom attaches to the side of the filter box) and suspect a broken conductor

Cheers for any help

Rob

[Mr Revhead]

keep an eye on the email in your sig.....

[AceSniper]

Do you still have a/c?
Below in the pic the sensor in red is a temp switch for the fan, remove it and use a jumper wire to ground the pin in the plug, if the fan turns off you need a new temp switch.... if it keeps running could be the pressure switch in the a/c line below the coil.
the wire runs from temp switch, to the a/c pressure switch to the relay box, no feed on the wire the fan will run, to turn the fan off wire needs a neg(-)