who cares about the rust prevention, 1g details please.
fyi dinitrol is pretty good stuff for rust prevention, my por15 didn't work too flash.. it doesn't like UV rays..
Rust prevention - Fish oil etc.
Moderator: The Mod Squad
30 posts
• Page 2 of 2 • 1, 2
by dirty1 » Tue Aug 11, 2009 3:19 pm
Have you thought about using industrial/marine grade products?
Altex Coatings (where i work) have a couple of different options.
single pack version - RIPO(rust inhibiting protective oil)
http://www.altexcoatings.co.nz/vdb/document/417
thin penetrating liquid for use in Interior of doors and panels etc.
$28.50 per litre = about 30SQ/M per litre
or:
two pack version - Altra Lock 577 (rust and crevice sealer)
http://www.altexcoatings.co.nz/vdb/document/413
penetrates surface rust , crevices, plate laps etc.
3 to 1 mix ratio
$48 per 1L kit = about 33 SQ/m per litre
both can be (and really should be) top coated, ripo with High build rust barrier.
577 with altra shield2000 or Altra build 536
check the Altex website for more info.
www.altexcoatings.co.nz
Altex Coatings (where i work) have a couple of different options.
single pack version - RIPO(rust inhibiting protective oil)
http://www.altexcoatings.co.nz/vdb/document/417
thin penetrating liquid for use in Interior of doors and panels etc.
$28.50 per litre = about 30SQ/M per litre
or:
two pack version - Altra Lock 577 (rust and crevice sealer)
http://www.altexcoatings.co.nz/vdb/document/413
penetrates surface rust , crevices, plate laps etc.
3 to 1 mix ratio
$48 per 1L kit = about 33 SQ/m per litre
both can be (and really should be) top coated, ripo with High build rust barrier.
577 with altra shield2000 or Altra build 536
check the Altex website for more info.
www.altexcoatings.co.nz
2005 GRS180 Crown Royal 2.5L (4GR-FSE) V6
1997 ST195 Caldina TZ-G Aerial (3S-GE)
1988 AE92 Rolla FX-GT (4A-GE) (gone, but not forgotten)
1997 ST195 Caldina TZ-G Aerial (3S-GE)
1988 AE92 Rolla FX-GT (4A-GE) (gone, but not forgotten)
- dirty1
- Toyspeed Member
- Posts: 69
- Joined: Thu Jan 31, 2008 5:34 pm
- Location: dunnos
by Bling » Tue Aug 11, 2009 5:23 pm
Yeah POR15 works perfectly if you use it correctly.
Anything other than proper use and its no better than any other product. Thats why unless you can make sure the surfaces are clean etc I wouldn't bother using it in hard to get to places. If you can clean/prep the surface, its great.
Anything other than proper use and its no better than any other product. Thats why unless you can make sure the surfaces are clean etc I wouldn't bother using it in hard to get to places. If you can clean/prep the surface, its great.
-
Bling - ** Moderator **
- Posts: 15990
- Joined: Mon Dec 22, 2003 9:02 pm
- Location: Quake City
by 2LTR Rona » Tue Aug 11, 2009 5:26 pm
Product I have used many times over with very good results is Blackguard.
Can be brushed on, rolled on or sprayed on
I opted for the brush on option, left to dry and then primed straight over the top
more details H E R E
Can be brushed on, rolled on or sprayed on
I opted for the brush on option, left to dry and then primed straight over the top
more details H E R E
-
2LTR Rona - Toyspeed Member
- Posts: 1903
- Joined: Wed Aug 11, 2004 3:43 pm
- Location: Wellington
by t0ms » Tue Aug 11, 2009 6:19 pm
Wurth make a product called "cavity protection spray" which is the yellowy waxy stuff manufacturers use when they build cars
could get a can or two of that and go to town on the hidden areas which will seal them off
could get a can or two of that and go to town on the hidden areas which will seal them off
-
t0ms - Toyspeed Member
- Posts: 1203
- Joined: Wed Jul 17, 2002 1:07 pm
- Location: Hamilton
by B1NZ » Tue Aug 11, 2009 6:32 pm
sergei wrote:That product is called Tectyl. It is nasty to apply - very sticky but does not smell like unwashed penis.
It is made by Valvoline and sold in NZ.
Arrgh, thats the stuff that is crap, it dries out and cracks, moisture gets in the cracks and rusts from my experience.
A smelly car is a small price to pay for a lifetime of non rustyness imo
Subaru GF8 Wagon
Subaru GC8 rally car project
http://www.hccc.org.nz - Keep up to date with all motorsport events in the Wellington region
Subaru GC8 rally car project
http://www.hccc.org.nz - Keep up to date with all motorsport events in the Wellington region
-
B1NZ - Toyspeed Member
- Posts: 6043
- Joined: Sun Sep 01, 2002 7:20 pm
- Location: Capital City
by Dell'Orto » Tue Aug 11, 2009 6:49 pm
B1NZ wrote:sergei wrote:That product is called Tectyl. It is nasty to apply - very sticky but does not smell like unwashed penis.
It is made by Valvoline and sold in NZ.
Arrgh, thats the stuff that is crap, it dries out and cracks, moisture gets in the cracks and rusts from my experience.
A smelly car is a small price to pay for a lifetime of non rustyness imo
Nah I dunno man, my sedan was tectyl'd to hell, and it was one of the least rusty KE70's I'd seen.
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
Quint wrote:Not just cock, large cock.
-
Dell'Orto - ** Moderator **
- Posts: 17494
- Joined: Tue Jul 08, 2003 5:07 am
- Location: Straight out the ghetto, Lower Hutt
by Mr Revhead » Tue Aug 11, 2009 6:59 pm
t0ms wrote:Wurth make a product called "cavity protection spray" which is the yellowy waxy stuff manufacturers use when they build cars
could get a can or two of that and go to town on the hidden areas which will seal them off
yeah i'v used that
it's also what toyota specify for spraying on hilux decks that get tray liners.
some of you are forgetting what this poster is doing.
-
Mr Revhead - SECURITY!
- Posts: 24635
- Joined: Tue Jan 20, 2004 4:06 pm
- Location: Nelson
30 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: Google [Bot] and 26 guests