Polyurethane engine mounts

[Jdawg]

Anybody know if there is someone in NZ making polyurethane engine mounts.
Curren needs a new rear mount

[MR2BOY23]

autolign can make them for you

[levinguy]

autolign can make them for you

and plus plastics in east tamaki will do them alot cheaper

if you take your old one in that is

[Akane]

If you can't find a mount for your car, you can always fill your old one with urethane. I did it to my MR2 mount and it stiffens things up quite a bit, great for someone who want to try things out.

[neo]

http://forums.toyspeed.org.nz/viewtopic.php?t=72915&highlight=urethane

http://forums.toyspeed.org.nz/viewtopic.php?t=71642&highlight=urethane

And there is 'The Mount Shop' in auckland 09-579 5965 , that can do replacement mounts - Double edit - and they supply via Partsmaster

[Bazda]

Plus Plastics in east tamaki. $30-40 per mount to be refilled with Urethane witht he old mount burnt out.
Cheaper if you only want to leave the stock rubber in there and fill over it.

[Jdawg]

Cheers for replies. Car is getting recomplied so will check if they will allow Urethane mounts first.
Just the rear mount from Appco is $160+

[molex]

Plus Plastics in east tamaki. $30-40 per mount to be refilled with Urethane witht he old mount burnt out.
Cheaper if you only want to leave the stock rubber in there and fill over it.

Hate to break it to you Bazda but their prices must have gone up.. last quote I had a month or two back was $60 each for small fwd mounts.

I ended up buying the urethane and doing it myself, $90 kit ended up doing 6 mounts with some to spare. Some I removed all of the rubber and poured it completely from urethane, some I left the stock rubber intact and filled in around it. Both worked very well. I used 80a shore rated stuff, if you leave the rubber intact they are very streetable.

[Bazda]

Plus Plastics in east tamaki. $30-40 per mount to be refilled with Urethane witht he old mount burnt out.
Cheaper if you only want to leave the stock rubber in there and fill over it.

Hate to break it to you Bazda but their prices must have gone up.. last quote I had a month or two back was $60 each for small fwd mounts.

I ended up buying the urethane and doing it myself, $90 kit ended up doing 6 mounts with some to spare. Some I removed all of the rubber and poured it completely from urethane, some I left the stock rubber intact and filled in around it. Both worked very well. I used 80a shore rated stuff, if you leave the rubber intact they are very streetable.

Ohh bugger then. I havent been there in a while.

[Jdawg]

4 mounts to Plus Plastics, get them back on 23rd, around 60 each but they had to burn the old rubber out as I was a bit pushed for time so will clean out the next set for a bit cheaper.
and still lots cheaper than buying rubber replacements

[Santa'sBoostinSleigh]

I ended up buying the urethane and doing it myself, $90 kit ended up doing 6 mounts with some to spare. Some I removed all of the rubber and poured it completely from urethane, some I left the stock rubber intact and filled in around it. Both worked very well. I used 80a shore rated stuff, if you leave the rubber intact they are very streetable.

where do you get that stuff from?
pretty easy to do, and work sweet?

[DeeCee]

tip: use ice to smooth off the urethane

[cat007]

Hate to break it to you Bazda but their prices must have gone up.. last quote I had a month or two back was $60 each for small fwd mounts.

I ended up buying the urethane and doing it myself, $90 kit ended up doing 6 mounts with some to spare. Some I removed all of the rubber and poured it completely from urethane, some I left the stock rubber intact and filled in around it. Both worked very well. I used 80a shore rated stuff, if you leave the rubber intact they are very streetable.

Where did you buy it from?

[molex]

Bought from here:

http://www.topmark.co.nz/articlelive/ar ... hanes.html

Lovely lady. Offers a discount for students, didn't help me sadly.