4age suzuki

[mike-sj4age]

Does anyone know what rwd gear boxs i can use with my 20v 4age?

[strx7]

use the SJ413 gearbox and put an adapter plate on it. I know of a super charged J20A going thru an SJ413 box, has never broken anything

[rollaholic]

if you want to use a toyota box then a T50 from AE86 or similar will work. optionally you can get a W55 or similar and buy a bellhousing to suit a 4A from niteparts

dont expect much change from $1k for either option though

[mike-sj4age]

any idea on how much an adapter plate would cost? and what would need to be done to fit the t50 thanks

[strx7]

make one out of some 8mm or 10mm plate

[rollaholic]

as long as the t50 has a 4A bell its a bolt up affair, they also came behind T series engines and probably some others so do be aware of that. as for fitting it to your suzi, i guess a custom cross member at a minimum and maybe some floor cutting depending on the shifter location

you might have to do some fiddling around with clutch slave etc too - does the suzi have a hydraulic clutch system?

[mike-sj4age]

can i buy one without the 4a bellhousing then take the bellhousing off a stock fwd box and fit it up?
and its cable