Toyspeed.org.nz Message Board

Toyota Club of New Zealand Message Board

Skip to content

T3/T4 to4e TURBO - ANY GOOD?

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Post a reply

T3/T4 to4e TURBO - ANY GOOD?

Postby CXGPWR » Sun Jan 17, 2010 6:03 pm

Right so i got me a brand new T3/T4 to4e Turbo, no wastegate, just wondering if anyone has had any know issues with them?
This one has been balanced so all shall be well in that department,
Was going to put on a sr20det or a 3sge + t dual vvt?
Which would be better? both 2l
or is this turbo not suited

Its chinese! lol
CXGPWR
Toyspeed Member
 
Posts: 194
Joined: Fri Aug 24, 2007 12:57 pm
Location: Palmerston North
Top

Re: T3/T4 to4e TURBO - ANY GOOD?

Postby frost » Sun Jan 17, 2010 6:39 pm

CXGPWR wrote:Its chinese! lol


no good,

save up for a good td06
frost
Toyspeed Member
 
Posts: 1705
Joined: Mon Aug 08, 2005 11:19 pm
Top

Postby CXGPWR » Sun Jan 17, 2010 7:07 pm

lol, its not that bad, still of good quality just not as expencive as a garett
CXGPWR
Toyspeed Member
 
Posts: 194
Joined: Fri Aug 24, 2007 12:57 pm
Location: Palmerston North
Top

Postby Dell'Orto » Sun Jan 17, 2010 7:09 pm

Got a compressor map for it? Might be ok, might be a sack of crap, you can never tell with those sorts of things
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt
Top

Postby Crucible » Sun Jan 17, 2010 7:27 pm

CXGPWR wrote:lol, its not that bad, still of good quality just not as expencive as a garett


There are numerous threads regarding cheap chinese knock offs on this forum, The parts used are no where near the quality of a Garrett.

Read this thread for starters and make youre own mind up.

viewtopic.php?t=74059&highlight=dpr
User avatar
Crucible
Real Life Mechanic
 
Posts: 1438
Joined: Sun Jul 17, 2005 2:46 am
Location: Wellington
Top

Postby MR2BOY23 » Sun Jan 17, 2010 8:07 pm

Look here http://www.bblgroup.us/ssautochrome.htm


Image
MR2BOY23
Toyspeed Member
 
Posts: 1500
Joined: Tue Nov 11, 2008 11:30 am
Location: Hong Kong
Top

Postby CXGPWR » Sun Jan 17, 2010 8:20 pm

^ now thats shit! lol
CXGPWR
Toyspeed Member
 
Posts: 194
Joined: Fri Aug 24, 2007 12:57 pm
Location: Palmerston North
Top

Postby sergei » Sun Jan 17, 2010 8:33 pm

Stay away from chinese turbos.

They are cheap for a reason.
User avatar
sergei
Mad Russian
 
Posts: 8406
Joined: Wed May 15, 2002 12:06 pm
Location: North Shore
Top

Postby steve murch » Sun Jan 17, 2010 8:44 pm





now thats funny, not for the owner just for what it is
steve murch
 
Top

Postby Akane » Sun Jan 17, 2010 8:46 pm

That xspower turbo BS is so long ago, I'm sure the new knock offs are better quality, by a very long mile.

That said, I wouldn't use a knock off myself :P
No "stance", no "hellaflush", none of that bullshit. Nothing but no grip on full boost.
http://www.lol.co.nz/ random shit.
User avatar
Akane
Toyspeed Member
 
Posts: 4073
Joined: Tue May 14, 2002 2:08 am
Location: Auckland
Top

Postby tsoob » Sun Jan 17, 2010 9:51 pm

what you wanna achieve with it??
Platinum Wheels
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
User avatar
tsoob
Toyspeed Member
 
Posts: 3253
Joined: Tue Dec 05, 2006 7:37 pm
Location: 201.1kw on 19psi
Top

Postby CXGPWR » Sun Jan 17, 2010 9:53 pm

It was cheap so just wanna use if for a litle while & then the car will be sold anyway,
CXGPWR
Toyspeed Member
 
Posts: 194
Joined: Fri Aug 24, 2007 12:57 pm
Location: Palmerston North
Top

Postby IH8TEC » Wed Jan 20, 2010 6:54 pm

Hey i've never had any probs with mine, handles 25psi, got 234kw atw on 4a with 23psi. could get more with better head etc. but meh.

The cheaper ones are better quality that that pic, that must be nearly 7-10yrs old surely
Current Rides: 1994 Hiace Custom
KTM 250sx

Previous Car: 1988 Toyota Levin 4agte
234kw atw and 12.5@183kmh
Sold to a muppit who wrecked it
Hmm
User avatar
IH8TEC
Toyspeed Member
 
Posts: 3128
Joined: Wed Nov 26, 2003 7:11 pm
Top

Postby gasman » Wed Jan 20, 2010 7:52 pm

just make sure you dont go to 32 psi
"What can possibly go wrong?"
User avatar
gasman
Toyspeed Member
 
Posts: 999
Joined: Tue May 04, 2004 11:29 pm
Location: lower hutt, wellington
Top

Postby Adamal » Wed Jan 20, 2010 11:39 pm

When you buy a Chinese turbo, you play Russian Roulette.
Motorsport is like sex. You could take it to track and have a long, enjoyable session, or you could take it to the strip and get it over with in less than 20 seconds.
User avatar
Adamal
Toyspeed Member
 
Posts: 11592
Joined: Sun May 02, 2004 4:01 pm
Location: Waitakere Drift Stage (Ranges)
Top

Postby Akane » Thu Jan 21, 2010 2:15 am

Adamal wrote:When you buy a Chinese turbo, you play Russian Roulette.


When you buy a MR2, you play Russian Roulette - with all 6 bullets
No "stance", no "hellaflush", none of that bullshit. Nothing but no grip on full boost.
http://www.lol.co.nz/ random shit.
User avatar
Akane
Toyspeed Member
 
Posts: 4073
Joined: Tue May 14, 2002 2:08 am
Location: Auckland
Top

Postby Boosted_162 » Thu Jan 21, 2010 6:11 pm

Akane wrote:
Adamal wrote:When you buy a Chinese turbo, you play Russian Roulette.


When you buy a MR2, you play Russian Roulette - with all 6 bullets


What about running a chinese turbo on an MR2? :lol: :lol:

Glad i finally ditched my chinese one tho.
Current:
1996 KZN185 Hilux Surf
2008 Mazda2
Boosted_162
Toyspeed Member
 
Posts: 3624
Joined: Sun Sep 04, 2005 1:02 am
Location: Kaukapakapa
Top
Post a reply

Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 12 guests

Powered by phpBB® Forum Software © phpBB Group
Time : 0.016s | 11 Queries | GZIP : On