Toyspeed.org.nz Message Board

by **Bazda** » Sun Jan 31, 2010 10:31 am

Just wanting to know if the ae82 front hubs are the same as ae92 front hubs?

Can the brakes off an ae92 be swapped to an ae82? Which means the mounting points of the calipers & offset of the drive flange on the ae82 are the same as ae92?

by **jakesae101** » Sun Jan 31, 2010 10:44 am

as far as i know there the same

http://www.toymods.net/forums/showthread.php?t=142

by **CAMB01** » Sun Jan 31, 2010 11:25 am

by **Bazda** » Sun Jan 31, 2010 11:38 am

awesome guys. thanks.

by **Paulio** » Sun Jan 31, 2010 11:39 am

you working on an ae82 barry?

by **Bazda** » Sun Jan 31, 2010 11:45 am

Paulio wrote:you working on an ae82 barry?

Making a wilwood brake kit.

red car · by pc » Sun Jan 31, 2010 6:59 pm

Bazda wrote:
Paulio wrote:you working on an ae82 barry?

Making a wilwood brake kit.

What size wheel will be required to go over the calipers?
I'm interested in looking at ways to get rid of sliders on the front brakes of my AE82.

by **Bazda** » Sun Jan 31, 2010 7:33 pm

pc wrote:
Bazda wrote:
Paulio wrote:you working on an ae82 barry?

Making a wilwood brake kit.

What size wheel will be required to go over the calipers?
I'm interested in looking at ways to get rid of sliders on the front brakes of my AE82.

Currently making sets to fit all rims.
Quick list here.

14" Wheels - Dynalite Forged with 255mm x 25mm Disc
15" Wheels - Dynalite Forged with 280mm x 26mm Disc
15" Wheels - Dynalite Billet with 290mm x 32mm Disc (may not fit all 15" rims depending on rim style you have))
16" Wheels - Dynalite Billet with 300mm x 32mm Disc
16" Wheels - Superlite Forged with 300mm x 32mm Disc (may not fit all 16" rims depending on rim style you have)
17" Wheels - Superlite Forged with 315mm x 32mm Disc

PM me for more details.

by **AE25** » Thu Feb 11, 2010 6:31 pm

ae82/ae92 have different bearing part number but not sure if size is actually different or not. ae92 by the looks of it has a shorter steering arm.

ive compared ae101 non superstrut to the ae82 and caliper interchange, disk offset listed as some on dba catalogue. locating hole different size 54 and 55mm. the axle flange is thicker on ae101 but is compensated in the shaft part where bearing fits on.
figured out an upgrade combo using ae82 hub/strut, aussie ae93 258x22 (54hole) and ae101 caliper. the ae93 disk matches jdm ae101 non superstrut disk in size but has the 54mm hole instead of 55mm.
bit off topic but might help in some way?

Toyspeed.org.nz Message Board

ae82 front hubs Vs ae92 front hubs

ae82 front hubs Vs ae92 front hubs

Who is online