Toyspeed.org.nz Message Board

by **gleem** » Mon Mar 08, 2010 6:07 pm

ive got a bad leak in my hose were the alloy joins to the rubber bit. Its a real bitch to get to so want to try cover it before replacing it. it only leaks when its on full lock and under real pressure. when i say leak i mean squirt!. ive tried stop leak and silicon. the silicone just poped of. So any more ideas. i was thinking a bit of ruber and clamp it there

by **celica_xr9145** » Mon Mar 08, 2010 6:44 pm

i tried almost everything on my Celica and nothing worked, ended up buying a new one in the end

by **Nuty|Mike** » Mon Mar 08, 2010 7:20 pm

take it off and take it to hydraulink for repair or rebuild ,high pressure hoses can never be bodged up.

by **evil_si** » Mon Mar 08, 2010 7:48 pm

omg
the only way to stop the leak is to get a new hose

by **iOnic** » Mon Mar 08, 2010 7:51 pm

evil_si wrote:the only way to stop the leak is to get a new hose

THIS! ^

by **allencr** » Tue Mar 09, 2010 6:06 am

gleem wrote:ive got a bad leak in my hose were the alloy joins to the rubber bit. Its a real bitch to get to so want to try cover it before replacing it. it only leaks when its on full lock and under real pressure. when i say leak i mean squirt!. ive tried stop leak and silicon. the silicone just poped of. So any more ideas. i was thinking a bit of ruber and clamp it there

Replace it.
Don't try to stop it with your finger, cause when its pressure is up it'll work just like one of those no needle air powered things for medical vaccines/shots & put fluid into you!!![/b]

by **Mr Revhead** » Tue Mar 09, 2010 8:15 am

yeha oil injection is nasty....
google for pics....

no grip · by **Akane** » Tue Mar 09, 2010 2:54 pm

Mr Revhead wrote:yeha oil injection is nasty....
google for pics....

What are the keywords?

by **Mr Revhead** » Tue Mar 09, 2010 2:58 pm

um oil injection. lol
I would look for some but I saw enough to last me on my training.

Basically if you get oil injected under pressure, the only way for them to help you is to remove ALL flesh that is infected.
Now consider that as soon as it's injected it starts travelling through the area it can get nasty....
I saw one pic of a guy who was hit in the thumb, and they had to carve huge channels out of him most of the way up his forearm.....

Website · by **Mr.Phreak** » Tue Mar 09, 2010 5:56 pm

http://www.tractorbynet.com/forums/atta ... injury.jpg

http://www.fluidpowersafety.com/images/ ... licoil.jpg

http://www.tractorbynet.com/forums/atta ... ection.bmp

etc etc, they basically fillet from the entry point to where ever it's travelled to flush it out.

no grip · by **Akane** » Tue Mar 09, 2010 10:57 pm

Mr.Phreak wrote:http://www.tractorbynet.com/forums/attachments/safety/129093d1241693198-hydraulic-fluid-injury-injury.jpg

http://www.fluidpowersafety.com/images/ ... licoil.jpg

http://www.tractorbynet.com/forums/atta ... ection.bmp

etc etc, they basically fillet from the entry point to where ever it's travelled to flush it out.

Website · by **Bling** » Tue Mar 09, 2010 11:41 pm

Fark me!!! Those are some nasty photos!

Fix it properly ya tight ass.

Toyspeed.org.nz Message Board

power steering hose leaks

power steering hose leaks

Re: power steering hose leaks

Who is online