Toyspeed.org.nz Message Board

Toyota Club of New Zealand Message Board

Skip to content

Rear knocking

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Post a reply

Rear knocking

Postby eskimo » Wed May 12, 2010 9:57 pm

Hey,

I have slight knock coming from the rear when going in and out of driveways / small bumps etc in my AE111 corolla.

The car doesnt have a rear sway so could warn castor arm bushes's make a similar sound?

Cheers
JH
"If in doubt, flat out" Colin McRae 1968-2007
Current:2003 Legacy 3.0R Spec B
Previous: ST185 GT4, SW20 MR2, ST206 Curren, AE111 Corolla GT
User avatar
eskimo
Toyspeed Member
 
Posts: 787
Joined: Wed Sep 13, 2006 12:55 am
Location: Auckland
Top

Postby Mr Revhead » Wed May 12, 2010 10:43 pm

maybe...
also check shocks
top hats
and random things in the boot! yes! really! :lol:
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson
Top

Postby eskimo » Thu May 13, 2010 9:12 am

Sweet, will check the shocks and top hats tonight. The boot is empty... as that something rolling around was my first though

Cheers
JH
"If in doubt, flat out" Colin McRae 1968-2007
Current:2003 Legacy 3.0R Spec B
Previous: ST185 GT4, SW20 MR2, ST206 Curren, AE111 Corolla GT
User avatar
eskimo
Toyspeed Member
 
Posts: 787
Joined: Wed Sep 13, 2006 12:55 am
Location: Auckland
Top

jack

Postby panda_dan » Thu May 13, 2010 9:57 am

I had a similar problem, drove me mad

Then I opened the rear compartment that holds the jack and tools and the jack was loose!

Tapping on the guard from the inside
panda_dan
Toyspeed Member
 
Posts: 269
Joined: Tue Dec 07, 2004 9:24 am
Location: 1 tree hill
Top

Postby mjrstar » Thu May 13, 2010 10:35 am

I had this issue also, it turned out to be worn swaybar bushes.
current cars:
Evo 4 230Kw atw
1971 mini.
79 bugeye 245kw atw.
Evo powered mx5 under construction

'not putting pictures in my signature since 2009'
User avatar
mjrstar
Toyspeed Member
 
Posts: 655
Joined: Thu Aug 12, 2004 11:08 am
Top

Postby eskimo » Thu May 13, 2010 1:46 pm

Yea, first thing i check was the jack, spare wheel..under the spare wheel. Doesnt have a rear sway bar..yet 8)

Was thinking maybe the castor arm bushes could be on there wayout and could be making a similar sound.

I plan on tracking it down this weekend as it drives me bonkers :evil:
"If in doubt, flat out" Colin McRae 1968-2007
Current:2003 Legacy 3.0R Spec B
Previous: ST185 GT4, SW20 MR2, ST206 Curren, AE111 Corolla GT
User avatar
eskimo
Toyspeed Member
 
Posts: 787
Joined: Wed Sep 13, 2006 12:55 am
Location: Auckland
Top

Postby 1I1 » Thu May 13, 2010 2:38 pm

eskimo wrote:Yea, first thing i check was the jack, spare wheel..under the spare wheel. Doesnt have a rear sway bar..yet 8)

Was thinking maybe the castor arm bushes could be on there wayout and could be making a similar sound.

I plan on tracking it down this weekend as it drives me bonkers :evil:


No rear sway bar?!
Official TGP and TRD supplier to Toyspeed
TRD Clicky >>Here
mark@manawatu.toyota.co.nz (Please mention Toyspeed ;))
User avatar
1I1
Toyspeed Sponsor
 
Posts: 3063
Joined: Mon Oct 01, 2007 6:55 pm
Location: Palmerston North
Top

Postby B_giB » Thu May 13, 2010 3:53 pm

1I1 wrote:
eskimo wrote:Yea, first thing i check was the jack, spare wheel..under the spare wheel. Doesnt have a rear sway bar..yet 8)

Was thinking maybe the castor arm bushes could be on there wayout and could be making a similar sound.

I plan on tracking it down this weekend as it drives me bonkers :evil:


No rear sway bar?!


That has rung alarm bells in my head too...
Current: SXE10 Altezza

Previous:AE86 Trueno Notch Back: Gone but not forgotten :cry: :(
AE101 Levin 20V super strut
1994 Mercedes Benz C280 Sport
User avatar
B_giB
Toyspeed Member
 
Posts: 1058
Joined: Sat Sep 06, 2003 7:02 pm
Location: Albany, Auckland
Top

Postby Mr Revhead » Thu May 13, 2010 3:56 pm

Does for me now I his sig says GT AE111....
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson
Top

Postby 1I1 » Thu May 13, 2010 4:32 pm

Yup should have a 17mm rear sway bar unless for some very very odd reason it's been removed..... Or he had a typo when he wrote that!
Official TGP and TRD supplier to Toyspeed
TRD Clicky >>Here
mark@manawatu.toyota.co.nz (Please mention Toyspeed ;))
User avatar
1I1
Toyspeed Sponsor
 
Posts: 3063
Joined: Mon Oct 01, 2007 6:55 pm
Location: Palmerston North
Top

Postby B_giB » Thu May 13, 2010 4:36 pm

And Caster bushes are in the front
Current: SXE10 Altezza

Previous:AE86 Trueno Notch Back: Gone but not forgotten :cry: :(
AE101 Levin 20V super strut
1994 Mercedes Benz C280 Sport
User avatar
B_giB
Toyspeed Member
 
Posts: 1058
Joined: Sat Sep 06, 2003 7:02 pm
Location: Albany, Auckland
Top

Postby Mr Revhead » Thu May 13, 2010 4:38 pm

You would not beleive the different names people have for some things!

Had an arguement with a guy after "control arm bushes" for the front of his implala.
Turns out he was after the castor rod bushes.... :x
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson
Top

Postby eskimo » Thu May 13, 2010 7:51 pm

Yea it has no rear sway bar.. and ive been looking for one to put in. Ill post a pic shortly
"If in doubt, flat out" Colin McRae 1968-2007
Current:2003 Legacy 3.0R Spec B
Previous: ST185 GT4, SW20 MR2, ST206 Curren, AE111 Corolla GT
User avatar
eskimo
Toyspeed Member
 
Posts: 787
Joined: Wed Sep 13, 2006 12:55 am
Location: Auckland
Top

Postby eskimo » Thu May 13, 2010 8:13 pm

Image

Uploaded with ImageShack.us

Image

Uploaded with ImageShack.us

Ok so here is the rear end of my car, what I thought were castor arms are the ones running from the middle to the hubs
"If in doubt, flat out" Colin McRae 1968-2007
Current:2003 Legacy 3.0R Spec B
Previous: ST185 GT4, SW20 MR2, ST206 Curren, AE111 Corolla GT
User avatar
eskimo
Toyspeed Member
 
Posts: 787
Joined: Wed Sep 13, 2006 12:55 am
Location: Auckland
Top

Postby Mr Revhead » Thu May 13, 2010 9:25 pm

Ah control arms, radius arms etc etc :lol:
Just be aware that some of those are spherical bearing bushs so they rotate easily
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson
Top

Postby eskimo » Thu May 13, 2010 9:53 pm

Sweet cheers for that, if they are worn could they make a similar sound?
"If in doubt, flat out" Colin McRae 1968-2007
Current:2003 Legacy 3.0R Spec B
Previous: ST185 GT4, SW20 MR2, ST206 Curren, AE111 Corolla GT
User avatar
eskimo
Toyspeed Member
 
Posts: 787
Joined: Wed Sep 13, 2006 12:55 am
Location: Auckland
Top

Postby allencr » Fri May 14, 2010 12:42 pm

eskimo wrote:Sweet cheers for that, if they are worn could they make a similar sound?


Sure.
Also, shake the exhaust and check/lever/twist/pull on all the suspension joints at the wheel's hub and all the suspension joints from the top of the body to the wheel's hub.
allencr
Toyspeed Member
 
Posts: 346
Joined: Thu Dec 04, 2008 9:02 am
Location: Talahassee, Florida USofA
Top

Postby eskimo » Fri May 14, 2010 1:07 pm

Sweet, will track down the source of the sound this weekend.

I have sourced a sway bar too :D (thanks Rick!) & I assume the AE111 trueno/levin one will bolt up without any issues.
"If in doubt, flat out" Colin McRae 1968-2007
Current:2003 Legacy 3.0R Spec B
Previous: ST185 GT4, SW20 MR2, ST206 Curren, AE111 Corolla GT
User avatar
eskimo
Toyspeed Member
 
Posts: 787
Joined: Wed Sep 13, 2006 12:55 am
Location: Auckland
Top

Postby 1I1 » Fri May 14, 2010 3:38 pm

Should be fine. I fitted a BZR to mine, floor pan and rear suspension etc in the sedan is the same as coupe
Official TGP and TRD supplier to Toyspeed
TRD Clicky >>Here
mark@manawatu.toyota.co.nz (Please mention Toyspeed ;))
User avatar
1I1
Toyspeed Sponsor
 
Posts: 3063
Joined: Mon Oct 01, 2007 6:55 pm
Location: Palmerston North
Top

Postby eskimo » Fri May 14, 2010 11:43 pm

Cheers. mite need to get a few bits and bobs to mount it from you depending what bits come with the bar & what condition they are in
"If in doubt, flat out" Colin McRae 1968-2007
Current:2003 Legacy 3.0R Spec B
Previous: ST185 GT4, SW20 MR2, ST206 Curren, AE111 Corolla GT
User avatar
eskimo
Toyspeed Member
 
Posts: 787
Joined: Wed Sep 13, 2006 12:55 am
Location: Auckland
Top
Post a reply

Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 16 guests

Powered by phpBB® Forum Software © phpBB Group
Time : 0.017s | 11 Queries | GZIP : On