ST205 RF axle

[strx7]

Has anyone got an st205 rf axle out that they could get some measurements off for me? and possibly a pic?

basically need to know the depth the inner cv goes into the transfer box from the seal surface to the end of the spline.

[Scottie]

I think right side is the one on the right.

32mm spline length

[strx7]

yip RH has the O-ring on it. and they are definitly ST205?

[Scottie]

Yes. def 205 ones

[strx7]

hmm I think i've worked out the issue. can anyone post a pic of the transfer box internals from the epc from an st205? toy-diy doesn't seem to work for the st205 frame number

[Scottie]

http://www.toyodiy.com/parts/p_J_199411 ... _3610.html



Look at me, being all helpful and stuff

[strx7]

when i put 205-blmvz into toyo diy it doesn't work and says "no record found"

Does anyone have a "41337" they'd like to part with?

[Scottie]

I tried ST205-randomnumbers and I couldn't get it to work so used the chassis number off an actual car.

ST205-0006832

[sergei]

hmm I think i've worked out the issue. can anyone post a pic of the transfer box internals from the epc from an st205? toy-diy doesn't seem to work for the st205 frame number

Just out of curiosity what are you trying to achieve? I have some knowledge related to right hand CV that I had to adapt to fit in ST205 box - is this where you are heading?

[strx7]

I'm trying to make my car go......

I am missing that thru axle shaft which gives drive from the side gear of the front diff to the RF axle.

[sergei]

http://www.toyodiy.com/parts/p_J_1991_T ... l?hl=41337

It looks like exactly same part is found on ST185 celica, and ST165 with viscous center (no diff lock, face lift model):

http://www.toyodiy.com/parts/p_J_1989_T ... l?hl=41337

[strx7]

yes, has to come out of a wide cog gearbox mated to a viscous transfer box