GT4 interchangeablity

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

GT4 interchangeablity

Postby Shrike » Thu May 10, 2012 10:38 am

hey guys do the rear st205 drive shafts fit in an st185 setup and if not can I swap the outer cvs from the st205 shafts to the st185 shafts?

And im guessing the st205 rear hubs are the same as the rear st185 hubs can anyone confirm ???

I hate mismatching parts lol
Why dream it when you can live it
User avatar
Shrike
Toyspeed Member
 
Posts: 731
Joined: Fri Jul 01, 2011 3:05 pm
Location: Melbourne

Postby DeeCee » Thu May 10, 2012 7:23 pm

not sure on driveshaft length, but the CV's should be the same with 26 splines. CVs are the same front and rear, though the GT4 ones are apparently slightly different to the camry CV's by way of having a longer spline length than the camry.

The hubs are different between the st165/185 and st205/215/246 with the hub centre 54mm on earlier models to 55mm on later models.
GT Four Adovansu
"I want to enjoy the powerful and nimble agility behavior."

Project: viewtopic.php?t=60474
Discussion: viewtopic.php?t=60475
User avatar
DeeCee
Toyspeed Member
 
Posts: 2765
Joined: Tue Feb 03, 2004 3:02 pm
Location: Lower Hutt

Postby Scottie » Thu May 10, 2012 8:27 pm

Should be able to use 185 shaft/CVs. 205 shafts are slightly longer. Unsure if that makes them unusable though.
User avatar
Scottie
Toyspeed Member
 
Posts: 379
Joined: Wed Nov 20, 2002 6:13 pm
Location: Auckland


Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 23 guests

cron