In my haste to remove to loom a wee while ago I forgot to document / photograph it
/edit : should also say its running a bluetop 4A
Cheers
Blair
KE25 Wiring Diagram or Photo
Moderator: The Mod Squad
8 posts
• Page 1 of 1
KE25 Wiring Diagram or Photo
by 2LTR Rona » Wed Jul 25, 2012 11:34 am
Anyone have a wiring diagram (photo would be much easier) for a KE25, showing the ignition / steering column wiring?
In my haste to remove to loom a wee while ago I forgot to document / photograph it
/edit : should also say its running a bluetop 4A
Cheers
Blair
In my haste to remove to loom a wee while ago I forgot to document / photograph it
/edit : should also say its running a bluetop 4A
Cheers
Blair
-
2LTR Rona - Toyspeed Member
- Posts: 1903
- Joined: Wed Aug 11, 2004 3:43 pm
- Location: Wellington
by Dell'Orto » Wed Jul 25, 2012 4:06 pm
Pretty sure I have a KE2* workshop manual at home, will have a looked
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
Quint wrote:Not just cock, large cock.
-
Dell'Orto - ** Moderator **
- Posts: 17494
- Joined: Tue Jul 08, 2003 5:07 am
- Location: Straight out the ghetto, Lower Hutt
by l1ttle_d3vil » Wed Jul 25, 2012 9:43 pm
What are you wanting to know exactly? How its routed, or what wires are what etc?
-
l1ttle_d3vil - Toyspeed Member
- Posts: 2639
- Joined: Sun Jun 27, 2004 10:22 pm
- Location: Bay of Plenty
by 2LTR Rona » Thu Jul 26, 2012 10:11 am
l1ttle_d3vil wrote:What are you wanting to know exactly? How its routed, or what wires are what etc?
What wires are what / what wires connect to what (on the back of the ignition barrel.
Short version, I had to remove the interior loom & as a result had to cut / disconnect two wires (now have four ends) one is solid green the other green with yellow stripe.
Due to the length time ago i did this, I now can not for the life of me remember which joined what or where, hence if someone had a 25 or similar & took a pic of the back half of ignition barrel showing how its connected i will have a starting point / will probably jog my memory
-
2LTR Rona - Toyspeed Member
- Posts: 1903
- Joined: Wed Aug 11, 2004 3:43 pm
- Location: Wellington
by l1ttle_d3vil » Thu Jul 26, 2012 9:28 pm
pretty sure I have an ignition backing sitting in my shed, and will be in wellington this weekend... can either take photos or bring it down with me if you want. Will be in the upper hutt area. from saturday morning until sunday afternoon.
-
l1ttle_d3vil - Toyspeed Member
- Posts: 2639
- Joined: Sun Jun 27, 2004 10:22 pm
- Location: Bay of Plenty
i can then print out & take with me (KE is a wee way away from where i live)
by l1ttle_d3vil » Thu Jul 26, 2012 11:03 pm
No worries - I meant I can bring it down with me if you wanted it... its just sitting in my shed doing nothing, otherwise I can take some photos.
Will have a look for it tomorrow.
Will have a look for it tomorrow.
-
l1ttle_d3vil - Toyspeed Member
- Posts: 2639
- Joined: Sun Jun 27, 2004 10:22 pm
- Location: Bay of Plenty
8 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 43 guests