1 gtz 1 plate

[phrogmodz]

looking for the previous owner of this white 88 ae92gtz turbo.

Anyone know him?

[Rob_GTZ]

My brother & I built it originally. Turbo motor was installed by owner after us, was in wellington at that time. Since then have seen it on Trademe from a couple of different sellers in Auckland.

[Bazda]

My mate brought it, we put a Turbo onto it. Made 200kw atw.
Sold it to a guy who lives down the road from me.

He since replaced the ex system for a full stainless custom made one.
Also got a set of our coilovers in there as well.

To date its still going strong. Owner was considering putting a cage in it and doing hill climb events.

[phrogmodz]

Got sold to a guy down here bout 4 days ago.....

Looking for a mod list, internals mainly and whar its capable of tuned for

[Bazda]

Got sold to a guy down here bout 4 days ago.....

Looking for a mod list, internals mainly and whar its capable of tuned for

Stock 4agze 8.0:1 version still running stock ecu.
custom steam tube manifold
T3/4 500hp turbo
Link Extra injector controller for boost above 10psi.
Tuned to 18psi
6 puk clutch
turbo oil drain pump
mrp coilovers

Overall its a pretty simple turbo conversion.

[phrogmodz]

Thanks barry,
Just wanted a heads up before i crack the engine open

[Bazda]

Thanks barry,
Just wanted a heads up before i crack the engine open

I see.
It really needs a much smaller turbo! The plans were to mod it more as thats why a big one was put on.

[phrogmodz]

It aparently didint appreciate 22lbs boost.....
Limited compression now.

What do you recomend for internals to handle that turbo set up?

[Bazda]

No it was only tuned for 18psi.

Just a rebuild with oem oversize pistons is all you need.
Or we can supply you forged cp pistons.

[d1 mule]

Willies AW11 made 555 HP on standard pistons.

[Bazda]

Yes thats on the 8.9:1 pistons.

The earlier 8.0:1 pistons are not quite the same in strength.