Are Toyota Blades any good?

General discussions on all non technical car related topics

Moderator: The Mod Squad

Are Toyota Blades any good?

Postby steroidcontaskie » Sun Mar 10, 2013 5:03 pm

Hey all

My girlfriend is considering replacing her Mini cooper with something a bit bigger and I was thinking a Toyota blade might be a good option. Basically they are a dressed up corolla with a 2.4 or a 3.5L engine in them.

I am guessing the 3.5 might be a bit of a handful.

Anyone had any experience with them or thought on relability?

Cheers
Ed
Science never sleeps...

Current JZZ31 soarer 2jzge-T (project), Crown Athlete 3.5 (Daily)
RVR Turbo (idle)
Carmy Wagon 2.5 (lent to mum).
Previous. A32 maxima (dead) 190e Merc (dead)
Terrano (dereg for 10 years, still being driven in west Auckland)
steroidcontaskie
Toyspeed Member
 
Posts: 349
Joined: Wed Jun 29, 2011 3:42 pm
Location: Auckland

Postby iOnic » Sun Mar 10, 2013 5:17 pm

I'd generally avoid the 2.4's (search 2AZ-FE on here) and the 3.5's are just lolz. Lucky you cant turn off the traction control on those.

Tell her to get a RunX Z.
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby saft » Sun Mar 10, 2013 5:19 pm

I have a 3.5.

I love it.
027 516 0556

I f**king love cheeseburgers.
User avatar
saft
Toyspeed Member
 
Posts: 654
Joined: Mon Oct 14, 2002 2:44 pm
Location: Everywhere

Postby Dell'Orto » Sun Mar 10, 2013 5:22 pm

Wouldn't even waste time with a 2AZ when there is a 2GR version available!
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby phoenix » Sun Mar 10, 2013 5:25 pm

I haven't gotten around to testing any of those but it seems the 2.4 blade - being a Corolla + 4cyl Camry engine - should be pretty indestructible? A manual would be nice but I don't believe any were offered.

On the Blade Master, a fwd v6 in a Corolla sounds like a nightmare to work on... Early 2GRs suffered from a failure of the rubber vvti oil line, later models used an upgraded line (yellow stripe?), then went to a hard line. Not too much work to swap out the early type for an upgraded rubber one before it goes.

saft wrote:I have a 3.5.

I love it.


Sounds like it's settled then
phoenix
Toyspeed Member
 
Posts: 454
Joined: Sun Jul 07, 2002 11:46 am
Location: New Plymouth

Postby iOnic » Sun Mar 10, 2013 5:35 pm

phoenix wrote:I haven't gotten around to testing any of those but it seems the 2.4 blade - being a Corolla + 4cyl Camry engine - should be pretty indestructible?


They strip headbolts usually around 100,000kms and are really delicate if not serviced properly/regularly which unless you're buying new is hard to confirm for sure. Thevparts guys I deal with love em :lol: safest bet IMO is to steer clear and either get a 3.5 or no Blade at all.
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby steroidcontaskie » Sun Mar 10, 2013 6:30 pm

I have heard the 2.4s crap they head bolts, kinda hoped it had been fixed by the time the blade came out.

She liked the interior of the blade, so I guess I will try to trick eher into getting a v6 one.

Cheers
Ed
Science never sleeps...

Current JZZ31 soarer 2jzge-T (project), Crown Athlete 3.5 (Daily)
RVR Turbo (idle)
Carmy Wagon 2.5 (lent to mum).
Previous. A32 maxima (dead) 190e Merc (dead)
Terrano (dereg for 10 years, still being driven in west Auckland)
steroidcontaskie
Toyspeed Member
 
Posts: 349
Joined: Wed Jun 29, 2011 3:42 pm
Location: Auckland

Postby steroidcontaskie » Sun Mar 10, 2013 6:31 pm

BTW, for anyone that has a 3.5, whats the fuel economy like it you dont give it the beans?
Science never sleeps...

Current JZZ31 soarer 2jzge-T (project), Crown Athlete 3.5 (Daily)
RVR Turbo (idle)
Carmy Wagon 2.5 (lent to mum).
Previous. A32 maxima (dead) 190e Merc (dead)
Terrano (dereg for 10 years, still being driven in west Auckland)
steroidcontaskie
Toyspeed Member
 
Posts: 349
Joined: Wed Jun 29, 2011 3:42 pm
Location: Auckland

Postby Alex B » Sun Mar 10, 2013 6:37 pm

The Blade Maser G is the one to get, pretty sure they have part leather etc. I tossed up between one and the MPS.
User avatar
Alex B
Toyspeed Member
 
Posts: 6539
Joined: Thu Nov 25, 2004 1:39 am
Location: London

Postby Dell'Orto » Sun Mar 10, 2013 6:46 pm

In the Aurion is not that flash, but its a good 200kg heavier than a Blade. Should sit down and work it out properly some time, but it doesn't seem to go much better than 650k's to a tank
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby molex » Sun Mar 10, 2013 11:01 pm

I have an 08 Blademaster G, really like it.

Economy wise, it varies wildly depending on the type of driving. My per tank average (a full fill being only ~50 litres) is around 450KM. On the open road you would see 11-12 KM/L, my Auckland traffic average is about 9KM/L. That's not giving it boot fulls everywhere, however it's not being aggressively economical either. Average speed for that last tank was 18 KM/h :(

Radar guided cruise control is the best feature. Love it.
molex
Toyspeed Member
 
Posts: 524
Joined: Sun Nov 11, 2007 12:08 am
Location: Auckland

Postby molex » Sun Mar 10, 2013 11:06 pm

Just to give you an idea, rolling it off the line mine would consistently run the 1/4 mile in 14.5-14.6 @ ~154 KM/h. Not ridiculously quick, however huge midrange and very good cruiser. 1800RPM @ 100KM/h
molex
Toyspeed Member
 
Posts: 524
Joined: Sun Nov 11, 2007 12:08 am
Location: Auckland

Postby steroidcontaskie » Sun Mar 10, 2013 11:34 pm

Cool, sounds good, think that would be more than fast enough for mt girlfriend. Most importantly I wouldn't feel as silly as I do driving her gold Mini Cooper with racing stripes.
Science never sleeps...

Current JZZ31 soarer 2jzge-T (project), Crown Athlete 3.5 (Daily)
RVR Turbo (idle)
Carmy Wagon 2.5 (lent to mum).
Previous. A32 maxima (dead) 190e Merc (dead)
Terrano (dereg for 10 years, still being driven in west Auckland)
steroidcontaskie
Toyspeed Member
 
Posts: 349
Joined: Wed Jun 29, 2011 3:42 pm
Location: Auckland

Postby Stott69 » Mon Mar 11, 2013 8:09 am

Supercharge the mini!
User avatar
Stott69
Toyspeed Member
 
Posts: 2605
Joined: Thu Oct 04, 2007 11:51 am
Location: Wainui Central!

Postby Elmendorf » Mon Mar 11, 2013 7:40 pm

I jewed out and got a 2.4 blade recently. Comes with a mechanical warranty so if head bolts let go I'm covered 8)

Love the car and the little touches and it goes well for what it is
User avatar
Elmendorf
Toyspeed Member
 
Posts: 2174
Joined: Tue Jul 22, 2003 11:51 pm
Location: Lurking where you can't find me


Return to General Car Discussion

Who is online

Users browsing this forum: Google [Bot] and 18 guests