4g63 coil pack wiring
Moderator: The Mod Squad
6 posts
• Page 1 of 1
4g63 coil pack wiring
by spoonza6 » Sat Mar 16, 2013 7:32 pm
Think I may have re wired my coilpack wrong, does anyone have wiring diagram or pics?
-
spoonza6 - Toyspeed Member
- Posts: 572
- Joined: Mon May 26, 2008 9:48 am
- Location: Auckland Airport, Auckland
by jondee86 » Sun Mar 17, 2013 10:45 am
Do you have the duel-channel igniter and an ECU capable of
providing two ignition outputs to run wasted spark ?
Cheers... jondee86
providing two ignition outputs to run wasted spark ?
Cheers... jondee86
1984 AE86 Corolla GT Liftback, NZ new... now with GZE
spec small port, twinscrew s/c and water/methanol injection
Watch this space >>> <<<
spec small port, twinscrew s/c and water/methanol injection
Watch this space >>> <<<
-
jondee86 - Toyspeed Member
- Posts: 903
- Joined: Mon Aug 18, 2003 11:08 pm
- Location: Wellington
by spoonza6 » Sun Mar 17, 2013 10:54 am
Yes I do
I have the igniter that came with the coilpack, and I have a link G3.
Car was running fine with this setup prior to me removing the already wired in coilpack to tidy up its wiring and I think I may have put the wires back onto the coilpack itself in the wrong configuration
Four terminals, two pair take an 8mm nut the lower takes 7mm nut. It's here I'm trying to rewire
I have the igniter that came with the coilpack, and I have a link G3.
Car was running fine with this setup prior to me removing the already wired in coilpack to tidy up its wiring and I think I may have put the wires back onto the coilpack itself in the wrong configuration
Four terminals, two pair take an 8mm nut the lower takes 7mm nut. It's here I'm trying to rewire
-
spoonza6 - Toyspeed Member
- Posts: 572
- Joined: Mon May 26, 2008 9:48 am
- Location: Auckland Airport, Auckland
by spoonza6 » Sun Mar 17, 2013 1:47 pm
No not yet
That would be helpful please.
On the back of the coilpack where the wiring is connected to the terminals is what I need please?
Was gonna go pick a part but where did this rain come from haha
That would be helpful please.
On the back of the coilpack where the wiring is connected to the terminals is what I need please?
Was gonna go pick a part but where did this rain come from haha
-
spoonza6 - Toyspeed Member
- Posts: 572
- Joined: Mon May 26, 2008 9:48 am
- Location: Auckland Airport, Auckland
-
QikStarlie - Toyspeed Member
- Posts: 1110
- Joined: Tue Mar 25, 2003 10:30 pm
- Location: lost..
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 24 guests