rwd 20v leads with Evo coils

[ryanfels]

Hey guys

Im doing a rwd 20v conversion into my aa63 and im using 4g63 wasted spark coils. Is there any off the shelf leads i can use with them? Im pretty open to mounting the coils where ever i need to (firewall would be ideal)

Or is custom the only way to go? (im trying to avoid this as i need the car going by next week and im a little tight on cash)

Thanks

[limbo]

Not quite what your are asking but another option if you want to do away with plug leads all together

http://s-86.com/coilpackplate.php

[QikStarlie]

can use some of those 5 dollar bosch ones from supercheap to get you going.

[ryanfels]

can use some of those 5 dollar bosch ones from supercheap to get you going.

I did think of that but dont they need to have the boot on them to seal the on the rocker cover?

[xsspeed]

long term probably better to, but its only really there to keep oil/water/crap out of the spark plug hole

[lorolla24]

I got a custom set made by MRP for $160.
Included tubes and 8mm cable to suit 20v head.

[Distrb]

Depends where you are mounting the coils but I used off the shelf top gun leads for a Suzuki baleno. Had both the correct ends

[ryanfels]

Depends where you are mounting the coils but I used off the shelf top gun leads for a Suzuki baleno. Had both the correct ends

I was hoping to mount them to the firewall, just above where the dizzy now sits

[Stu-]

$8 eagle leads from Appco etc FTW.
Just measure with string and go from there, you can cut and adapt the covers off the stock leads to plug the top of the tubes with a bit of glue if you need.

[ryanfels]

Hmmm, i do like using 2 pot glue