Hi guys, What ideas do we have?
Symptoms: Vacuum gauge reading -18.5 (3sgte's idle @ -20(Generally))
Choppy idle, quite possibly missing.
Last week I noticed straight away as I pulled up my driveway that the vacuum was higher than normal, so i took it for another quick run. Max boost was 6psi and was very slow to get there.
I had a quick check for vacuum leaks, couldn't find any thing, parked her up for the week.
Today I went back out, turned her on, once warm same problems. fiddled around, felt and listened for vacuum leaks.Nothing. Tightened all air hoses. Nothing. Took her for a drive, would now boost over 6 psi, but was very slow to get there and would start missing at 5k revs.
In the interim I tried changing the BOV in case it was leaking. No change.
I might add 2000kms (at a maximum) I changed the Spark plugs and leads for new genuine parts.
Since the head/headgaket/cambelt/putting a ct26 back on job(same time as leads and plugs). It has been running great untill now.
Ideas????
Ta
James
3SGTE issues
Moderator: The Mod Squad
11 posts
• Page 1 of 1
3SGTE issues
by headshotnz » Sat Oct 19, 2013 12:54 pm
Current: UCF20 NZ New LS400,
(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)
Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)
Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
- headshotnz
- Toyspeed Member
- Posts: 699
- Joined: Thu Oct 30, 2008 7:39 pm
- Location: Johnsonville
by Dell'Orto » Sat Oct 19, 2013 7:12 pm
Cracked piston. Does it blow smoke?
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
Quint wrote:Not just cock, large cock.
-
Dell'Orto - ** Moderator **
- Posts: 17494
- Joined: Tue Jul 08, 2003 5:07 am
- Location: Straight out the ghetto, Lower Hutt
by iOnic » Sat Oct 19, 2013 7:49 pm
Do a boost leak test to eliminate vac leaks then Do a leak down test. Could have hit a valve and it has progressively burnt out from not seating right.
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
-
iOnic - Toyspeed Member
- Posts: 3736
- Joined: Fri Jun 25, 2004 6:31 pm
- Location: Melbourne VIC
by rollaholic » Sun Oct 20, 2013 9:11 am
yeah take the exhaust off and go for a wee drive. will be fun if nothing else 
BASU!
-
rollaholic - Toyspeed Member
- Posts: 5383
- Joined: Fri May 28, 2004 2:19 am
- Location: West is Best
by headshotnz » Mon Oct 21, 2013 1:31 pm
Dell'Orto wrote:Cracked piston. Does it blow smoke?
No more than a well maintained 200+km turbo car will smoke.
Current: UCF20 NZ New LS400,
(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)
Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)
Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
- headshotnz
- Toyspeed Member
- Posts: 699
- Joined: Thu Oct 30, 2008 7:39 pm
- Location: Johnsonville
by headshotnz » Mon Oct 21, 2013 1:33 pm
iOnic wrote:Do a boost leak test to eliminate vac leaks then Do a leak down test. Could have hit a valve and it has progressively burnt out from not seating right.
Hmm its worth a check. I'm also wondering if it has skipped a tooth on the cambelt.
Some one should just buy it from me. job done.
Current: UCF20 NZ New LS400,
(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)
Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)
Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
- headshotnz
- Toyspeed Member
- Posts: 699
- Joined: Thu Oct 30, 2008 7:39 pm
- Location: Johnsonville
by headshotnz » Mon Oct 21, 2013 10:03 pm
haha make an offer.
Current: UCF20 NZ New LS400,
(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)
Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)
Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
- headshotnz
- Toyspeed Member
- Posts: 699
- Joined: Thu Oct 30, 2008 7:39 pm
- Location: Johnsonville
by GDII » Mon Oct 21, 2013 10:25 pm
When did it turn Matte black? My offer would probably be too low and I wouldn't be allowed to buy another one, quite keen on a turbo engine for my current SW though.
1990 SW20 MR2
Previous 1990 EE90 Corolla
Previous 1990 EE90 Corolla
-
GDII - Toyspeed Member
- Posts: 1645
- Joined: Wed Aug 22, 2007 4:13 pm
- Location: Wellington
by headshotnz » Mon Oct 21, 2013 10:36 pm
It always has been. You must have seen my other one 
The tri's I have kept and will be going on the matt black 2.
The tri's I have kept and will be going on the matt black 2.
Current: UCF20 NZ New LS400,
(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)
Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)
Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
- headshotnz
- Toyspeed Member
- Posts: 699
- Joined: Thu Oct 30, 2008 7:39 pm
- Location: Johnsonville
11 posts
• Page 1 of 1
Who is online
Users browsing this forum: Bing [Bot] and 49 guests