fujitsubo rear muffler, toss or repair - rattles

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

fujitsubo rear muffler, toss or repair - rattles

Postby Shins » Tue Dec 09, 2014 7:44 pm

i was checking my rear muffler for an annoying rattle so unbolted it from car to discover when i shake the muffler it sounds like a metal pipe has come loose inside it

sadly it was a good muffler new it is part of a fujitsubo cat back system, car is ae111 sprinter trueno bzr

so is it worth even bothering to get quotes to repair it or just bite the bullet and replace it, i want another bolt on unit if poss

Image
Shins
Toyspeed Member
 
Posts: 22
Joined: Sun Aug 31, 2014 11:59 am
Location: paraparaumu, kapiti

Re: fujitsubo rear muffler, toss or repair - rattles

Postby Dell'Orto » Tue Dec 09, 2014 8:26 pm

I doubt it's economically viable to repair. The rattles are from the internal baffles breaking off, so would require basically completely rebuilding.
AdrenalinR may be able to make a suitable bolt on replacement?
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Re: fujitsubo rear muffler, toss or repair - rattles

Postby Heylin » Thu Dec 11, 2014 1:16 pm

+1 on Adrenalin R stuff. best exhaust \ muffler ive used.

Going by price for these

http://www.trademe.co.nz/motors/car-par ... 612099.htm

Your replacement would be under $300.
Heylin
Heylin
Toyspeed Member
 
Posts: 682
Joined: Sun Mar 23, 2003 11:37 am

Re: fujitsubo rear muffler, toss or repair - rattles

Postby phoenix » Fri Dec 12, 2014 1:41 pm

It seems a lot of the Japanese mufflers like that use mild steel internal pipe, and rust out over time. I've also found quite a few of the 3" systems actually squeeze down to 2.5" or even 2.25" (mild steel) through the muffler.

It would probably only be economic if you were rebuilding it yourself, or you really wanted to keep that muffler exterior. I did it once myself, probably wouldn't do it again.
11 second Honda
phoenix
Toyspeed Member
 
Posts: 454
Joined: Sun Jul 07, 2002 11:46 am
Location: New Plymouth

Re: fujitsubo rear muffler, toss or repair - rattles

Postby Shins » Sat Dec 13, 2014 11:33 pm

thanks for replies will probably commit to a new cat-back in the long term, but after christmas D:
Shins
Toyspeed Member
 
Posts: 22
Joined: Sun Aug 31, 2014 11:59 am
Location: paraparaumu, kapiti

Re: fujitsubo rear muffler, toss or repair - rattles

Postby Vertigo » Sun Dec 14, 2014 5:54 am

Ive got a similar muffler just sitting around that I could never use. $50? Youd need to weld that bend piece on.
TVIS just kicked in, yo!
AW11 200kw 4AGTE build Discuss
Image
Vertigo
Toyspeed Member
 
Posts: 1172
Joined: Mon Aug 29, 2005 12:03 pm
Location: Auckland


Return to Tech Questions

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 9 guests