Toyspeed

black-red = has constant 12v power, drops to 7v when cranking
blue-red = has 0.5v when key off, then 12 when on ACC
black-yellow = has 12v when switched to ON, and drops to 7v when cranking
black-white = nothing? has random power when cranking only
brown = has constant 12v power, drops to 7v ...

Grab a test light or multi meter

key off only 1 or sometimes 2 will have power. these are the feeds to the barrel and also your turbo timer. (from memory - white)

turn key to accessory. one wire will liven up... this is accessory. dont need it. If you connect it when the turbo timer is running ...

http://www.vehiclesecurity.co.nz/

Friend of mine in wellington but don't know whether he does too much cheap stuff?

either track down an old one or head to a dealer in welly and they will have new items. they are usually around the 90 buck mark.

it will need to be taught to your system so will need to get someone with know how to do it or explain how to anyways..

And you can usually get the cases for like ...

are you kidding... your taking a selca out and replacing with an M60!!!

selca are one of the top uk based brands and produce thatcham catagory rated alarms.... thatchams are like 10 times higher rating standard the the nzsa ratings.....

amazing how stuff comes back to haunt you eh

i was referring to a party in which photos were taken of said competition that resulted in chelles gettin in trouble

still have the photos somewhere

still have the video of mr oizo dancing to s club 7 too hahah

oh yeah and the old hamilton TS parties and associated hyjinkns.....

eh chelles

Was me and Brendon upside down in the charade at taupo wasn't me driving though!!!!

the mega meet we had in welly was a wicked weekend minus the rolled landy the 4 car pile up and chelles getting that damn SR coupe..... shoulda been mine

best memories would have to be the trackdays. i ...

if cameron can keep tua at arms length for a few rounds i reacon he'll get tire real quick and he'll finish him off pretty quick. tua hasnt done anything for quite a while

however if tua cuts cameron up early he could be in with a sniff

also i like their glass break sensors, to me thats te only decent break in sensor you can get because it doesn't pick up false alarms like shock sensors do. if you have a shock sensor and your alarm keeps going off because even the slightest bit of noise from an exhaust sets it off, that means ...

the only thing you'll need to watch is using polyester resins. they will eat some foams leaving you with a gooey sticky napalm mess that used to be you mould...

like the previous poster said just do a litle test piece first.

epoxy resins "shouldn't" eat the foam but are a litle more expensive ...

DXROLLA wrote:Are there any tips and tricks in the rebuild to stop them from burning oil or is it just a design thing?

don't do 200 000 k's on it not much you can do about it its just a mileage thing but with a freshen up should be just like new

any bolt supply/engineering supplies should have them
try these guys?

http://www.fortressfasteners.co.nz

are you talking about "cb" eg 27 mhz or "PRS" which is 36mhz from memory...

your sx 015 is "prs" whereas the two down the bottom you mention are "cb"

if your 015 work's you'll need to get one of the ones from this page
http://www.uniden.co.nz/NEW_ZEALAND/p_index_transceivers ...

not really. boats dont have them at all. i think they're just there to allow an area for fuel vapours to collect and turn back to liquid before re entering the tank

that being said if you do remove it you will need to have a breather from your tank as they are usually sealed so with no area for ...

Wurth make a product called "cavity protection spray" which is the yellowy waxy stuff manufacturers use when they build cars

could get a can or two of that and go to town on the hidden areas which will seal them off

find a dealer in your area for AUTOGLYM.

it aint cheap but does a magic job

get "PAINT RENOVATOR" which is a conditioner and light cutting compound which will bring the colour back up

next use "SUPER RESIN POLISH" to bring the shine up. one coat is ok but 2 or 3 will make it mint.

then ...

just to throw a spanner in the works

a lot of the two stroke quotes are largely redundant these days, especially in terms of outboard engines anyway

technology has solved the problem of "high fuel consumption" anyway

we rigged 6 boats, 3 with 115 hp 1.6 liter 4 cylinder 4 strokes and 3 with ...

yeah man still around

in taupo though now bro. but in hamilton most weekends still