Toyspeed.org.nz Message Board

Website · by **Bling** » Mon Sep 11, 2006 1:43 pm

WTD: KE30/35 Spring top hats

if thats the right terminology for them.....

I have some non-tapered springs that dont fit my kp struts, so need a pair of KE30/35 spring top hats to use in my kp struts for cheap cheap if anyone has a set lying around and is keen to sell, let me know,

chur chur

by **fangsport** » Mon Sep 11, 2006 5:12 pm

will ke70 fit? have heaps of those.

by **Snoozin** » Mon Sep 11, 2006 5:38 pm

KE70's use the tapered springs as well iirc.

OMG so shiny! · by **Dell'Orto** » Mon Sep 11, 2006 5:59 pm

Early ones dont. My sedan has straight and the wagon has tapered. But I think KE70 ones are different to KE30?

Website · by **Bling** » Mon Sep 11, 2006 7:19 pm

Not too sure about the ke70 ones to be honest, i'll pop out and try my springs against one and let ya know.

the catalogue for kings just lists ke30-35 top hats as suitable, but I guess that may not be the limit...

EDIT:

just measured it against a ke70 s/w top hat and it was too small to fit the spring so measured the springs I have

Springs I have:
OD = 140mm
ID = 115mm (ish)

by **fangsport** » Tue Sep 12, 2006 12:59 am

i have 2 top hats, either TE71 or TT132. they will accept up to 150 OD and 115 ID springs.

may be of use.

by **crispy'86** » Thu Sep 14, 2006 1:19 pm

mr crispy could pick up for you if need be :wink:

Website · by **Bling** » Thu Sep 14, 2006 8:49 pm

i've PM'd him crispy, going to try and get ke30 ones first, as they must be best suited going by what i've read. not ruling them out tho

Toyspeed.org.nz Message Board

WTD: KE30/35 Spring top hats

WTD: KE30/35 Spring top hats

Who is online