Performance Shop?

Moderator: The Mod Squad

Performance Shop?

Postby JDubz » Wed Jun 17, 2009 7:40 pm

Im looking at taking my starlet into the shop to get abit more work done to it. Dose anyone know anygood shops around the waikato area?

Wanna get a better turbo setup done along with a standalone ECU etc
User avatar
JDubz
Toyspeed Member
 
Posts: 2
Joined: Tue Nov 25, 2008 4:43 pm
Location: Waikato H-Town

Postby Caldina3SGTE » Wed Jun 17, 2009 7:54 pm

for the fabrication of the manifold etc i would go to sinco customs
i recently got him to make me a manifold to suit a td05 for my caldina and all the other bits like dump pipe exhaust and intercooler piping and its mint az i recommend them
as for the standalone ecu i have no idea whos the best it all depends on wht ecu your gonna be getting,
hope that helps

Peter
Caldina3SGTE
Toyspeed Member
 
Posts: 207
Joined: Sat Jul 07, 2007 12:55 am
Location: Hamilton

Postby GTTpower » Wed Jun 17, 2009 8:52 pm

Cartune? Could also try Mitchell Motorsport or Total Performance.
1999 SXE10 Altezza RS200Z
2004 Honda SCV100
Previous: 1993 EP85 Starlet, 1984 KP60 Starlet
Steam/Origin ID: nzEP85
User avatar
GTTpower
Toyspeed Member
 
Posts: 1160
Joined: Wed May 02, 2007 8:47 am
Location: Hamilton

What

Postby JDubz » Thu Jun 18, 2009 9:26 pm

Do you guys think about KazSpec?

Im looking at putting in a link g4 storm?
User avatar
JDubz
Toyspeed Member
 
Posts: 2
Joined: Tue Nov 25, 2008 4:43 pm
Location: Waikato H-Town

Postby Rally Stylz » Fri Jun 19, 2009 9:18 am

I would suggest Te Rapa Automotive.
They specialize in links both install and tune but can tune any computer.
Chris there is a whizz on the dyno and has tuned allsorts of cars including Colemans Toyota powered GT1 circut rocket
4AGE powerd KE70 + Gravel = Big smiles!!!
Rally Stylz
Toyspeed Member
 
Posts: 15
Joined: Tue Apr 21, 2009 11:16 am
Location: Hamilton

Postby Emperor » Wed Jun 24, 2009 7:53 pm

Sinco, Te Rapa Automotive and Mitchel are my reccomendations.

I've seen a few bombs come from Kaz, but more good than bad. So it's up to you.
Total.. I'm un-decided, when I first built my RX7, the tune was shit, got to taupo and the car had a miss-fire at 4500 until 7500rpm. Engine builder blamed Total, Total blamed Link for not telling them theyll need to put in a alti-meter. Link blamed Total for not knowing. So yeah.


Meh..
facebook.com/zeroclearanceswag
User avatar
Emperor
Toyspeed Member
 
Posts: 4815
Joined: Wed May 12, 2004 1:14 am
Location: Hamilton

Postby bbq1988 » Wed Jun 24, 2009 10:07 pm

anyone know who tunes MAP ecu's in town?
Baked, Not Fried.
bbq1988
Toyspeed Member
 
Posts: 1379
Joined: Tue Jun 06, 2006 10:06 am
Location: Te Kuiti, Land of the wrong white crowd

Postby offensive » Thu Jun 25, 2009 9:57 am

havent had any done myself, i can only go by what ive been told, but those who know ewan, he used to get all his tuning done in morrinsville. Cant remember exactly the name, its udey motors i think. Dont remember ewan ever having a problem there, always seemed happy with them. I think they tune some rally cars or something.
above this is a line
quote: "Reclusive girls dont shave their pubes"
User avatar
offensive
Old Skool User!
 
Posts: 1353
Joined: Thu May 23, 2002 3:49 pm
Location: land of tron

Postby FLAWLES » Thu Jun 25, 2009 10:21 am

bbq1988 wrote:anyone know who tunes MAP ecu's in town?


there should be a base tune on the map ecu forum
i know my uncle had one for his mr2 so you could possibly get one of that or email him of the web site asking who is the local tuner for them?

hell i dont even know

and rob yea uddys good c**ts
User avatar
FLAWLES
Toyspeed Member
 
Posts: 1856
Joined: Sat Oct 11, 2003 11:26 am
Location: Hamilton

Postby Rally Stylz » Thu Jun 25, 2009 10:34 am

Uddy's know Subarus inside out and one of the best in the country for them.
Not heard much about stuff other than that.

Mitchell Race Extreme/ Extreme RPM are good for good name brand parts that you can trust. They are also very good at fabrication but i think it gets quite pricey there.
4AGE powerd KE70 + Gravel = Big smiles!!!
Rally Stylz
Toyspeed Member
 
Posts: 15
Joined: Tue Apr 21, 2009 11:16 am
Location: Hamilton

Postby mr_monkey » Thu Jun 25, 2009 1:01 pm

Whats sinco charge for a 4 cylinder manifold?
Previous rides: 1992 Toyota Trueno, 1992 Nissan GTI-R, 1985 Toyota AW11, 1990 Toyota SW20 Turbo, 1994 Toyota Supra Twin turbo, 1991 Toyota Soarer Turbo, 1991 nissan Safari
Cogent wrote: there is a fraudulent cogent-post in your sig and i insist that you cease displaying it immediately or else i'll track you down and perform acts of homosexuality on your face
mr_monkey
Toyspeed Member
 
Posts: 756
Joined: Tue Oct 05, 2004 4:08 pm
Location: Hamilton

Postby AceSniper » Thu Jun 25, 2009 5:20 pm

sinco does tidy work at alright prices,
Te rapa auto im not sure about... tunes iv seen from there are a bit hit and miss.
Uddy's are good, dont know about there pricing though.

I think the map ecu has a mr2 file on the website? but would pay to have it touched up for your setup.
User avatar
AceSniper
Toyspeed Member
 
Posts: 2002
Joined: Sun Aug 04, 2002 10:55 am
Location: Hamilton

Postby FLAWLES » Thu Jun 25, 2009 5:30 pm

fully agree
after all its only a base tune and every car is different
User avatar
FLAWLES
Toyspeed Member
 
Posts: 1856
Joined: Sat Oct 11, 2003 11:26 am
Location: Hamilton

Postby bbq1988 » Thu Jun 25, 2009 5:50 pm

AceSniper wrote:
I think the map ecu has a mr2 file on the website? but would pay to have it touched up for your setup.


There is a ST205 map that has been used on caldina's, i will have all of the software and a laptop for the tuner to use anyway so i guess aslong as they dont mind using that
Baked, Not Fried.
bbq1988
Toyspeed Member
 
Posts: 1379
Joined: Tue Jun 06, 2006 10:06 am
Location: Te Kuiti, Land of the wrong white crowd

Postby the fallen303 » Thu Jun 25, 2009 7:04 pm

ivan udy co-drives my uncles rally car, they're awesome out there, bit pricey, but you get what you pay for, and with ecu's, you want the best. they were running links in their rally cars for years right from the first link, only recently changing to i think motec for different mapping layout? has built super GT cars there, rally cars, etc, saw a nutty ae86 in there a while back.

they don't have a dyno there, so would have to look at either road tune which some say you get better drivability, or think they can source using someone elses dyno.
jzs147 aristo, jza70 supra, jza80 supra
true house of JZ
Image
Stay true to the origin
User avatar
the fallen303
Toyspeed Member
 
Posts: 1060
Joined: Sun Apr 20, 2003 8:05 pm
Location: hamilton

Postby Caldina3SGTE » Thu Jun 25, 2009 9:04 pm

Whats sinco charge for a 4 cylinder manifold?


i just got one made for my caldina gtt it cost me 750+gst becouse it was a twin scroll turbo
he does mint az work i highly recommend him
Caldina3SGTE
Toyspeed Member
 
Posts: 207
Joined: Sat Jul 07, 2007 12:55 am
Location: Hamilton

Postby groupagt4 » Fri Jun 26, 2009 10:32 pm

PLEASE PLEASE stay away from te rapa automotive and cartune absolutely useless and then they charge you a shitload. mitchells are good. Performance and tuning in ellis street is pretty good to
groupagt4
Toyspeed Member
 
Posts: 378
Joined: Sat Aug 05, 2006 2:17 pm
Location: hamilton

Postby Emperor » Sat Jun 27, 2009 2:10 am

I've had nothing but good at te rapa.. but as for cartune.. wouldnt touch with a barge pole
facebook.com/zeroclearanceswag
User avatar
Emperor
Toyspeed Member
 
Posts: 4815
Joined: Wed May 12, 2004 1:14 am
Location: Hamilton

Postby bbq1988 » Sat Jul 04, 2009 11:36 pm

seen your wagon in town today emperor, looks choice on those wheels!
Baked, Not Fried.
bbq1988
Toyspeed Member
 
Posts: 1379
Joined: Tue Jun 06, 2006 10:06 am
Location: Te Kuiti, Land of the wrong white crowd

Postby BlakeNZ » Sun Jul 05, 2009 11:24 am

Any comments/opinion/experience on Lightning Motorsport??
former car 1991 JZZ30 soarer 1JZGTE 11.5sec@122mph(stock turbos,E85)
current car 1993 JZZ30 soarer (Golden Boy)
BlakeNZ
Toyspeed Member
 
Posts: 625
Joined: Thu Oct 03, 2002 1:53 pm
Location: Palmerston Nth

Next

Return to Hamilton / Waikato Region

Who is online

Users browsing this forum: No registered users and 1 guest

cron