Replacement Corolla Engine
Moderator: The Mod Squad
10 posts
• Page 1 of 1
Replacement Corolla Engine
by carlos3 » Thu Mar 29, 2007 10:13 pm
Can anyone point me in the right direction to get hold of a replacement Corolla 2E engine? Any suggestions on what I should expect to pay also greatfully accepted!
- carlos3
- Toyspeed Member
- Posts: 11
- Joined: Fri Apr 07, 2006 6:41 pm
by Dell'Orto » Thu Mar 29, 2007 10:17 pm
Trade Me is probably the best bet, though your local wreckers will be able to source you one with a warranty.
As for cost - very little. 2E's arent particularly sought after, you might be able to pick up one for next to nothing.
Edit: Seeing as how I'm already looking through the appropriate section, here you go
http://www.trademe.co.nz/Browse/SearchR ... Region=100
As for cost - very little. 2E's arent particularly sought after, you might be able to pick up one for next to nothing.
Edit: Seeing as how I'm already looking through the appropriate section, here you go
http://www.trademe.co.nz/Browse/SearchR ... Region=100
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
Quint wrote:Not just cock, large cock.
-
Dell'Orto - ** Moderator **
- Posts: 17494
- Joined: Tue Jul 08, 2003 5:07 am
- Location: Straight out the ghetto, Lower Hutt
by strx7 » Thu Mar 29, 2007 10:31 pm
expect to pay somewhere between $350 and $450 for one with a 3 month warranty (that'll most likely be +gst) (EE80/90/100) thru to $550-600 for something having done low k's with a 6 months warranty (outta a NZ new EP90/EE110 or similar)
Online Car Forums - Where Hui seems to take preference over Do-ey
HDJ81- 112AWKW @ 10psi), FC3S (Tarmac Spec 335rwhp@11psi), 3SGTE stroker - replacement body found.
Motorsport Bay of Plenty - http://www.mbop.org.nz
HDJ81- 112AWKW @ 10psi), FC3S (Tarmac Spec 335rwhp@11psi), 3SGTE stroker - replacement body found.
Motorsport Bay of Plenty - http://www.mbop.org.nz
- strx7
- Toyspeed Member
- Posts: 3707
- Joined: Mon May 24, 2004 12:06 am
- Location: Tauranga
by big_boy » Thu Mar 29, 2007 10:55 pm
payed $350 for a 130k 3E they look the same & the cam couvers change over so no one will ever know you have an extra 200cc 
The faster you go the quicker you get there
soarer 4.6L V8 twin turbo sold before i finished it fully
datson 1200 SSS coupe & GA60 soon to be 7M-GTE
doing up: MA61 5M-GZE-U with TAVAS ???
for sale EE90
soarer 4.6L V8 twin turbo sold before i finished it fully
datson 1200 SSS coupe & GA60 soon to be 7M-GTE
doing up: MA61 5M-GZE-U with TAVAS ???
for sale EE90
-
big_boy - Toyspeed Member
- Posts: 899
- Joined: Sun Sep 04, 2005 10:34 pm
- Location: dunedin
by thaphatty » Thu Mar 29, 2007 11:05 pm
seen a biiiiig samoan guy stagger off with a 2E from the "$50 for all you can carry" section of a wrecker yard
Adamal wrote:Harro, this your captain speaking. Wercome to fright free nine five to Werrington
-
thaphatty - Toyspeed Member
- Posts: 1172
- Joined: Thu May 22, 2003 7:55 pm
- Location: Hamilton
by big_boy » Thu Mar 29, 2007 11:17 pm
i can just lift one from the ground to the bench there not to bad only about 120kg ish if that
The faster you go the quicker you get there
soarer 4.6L V8 twin turbo sold before i finished it fully
datson 1200 SSS coupe & GA60 soon to be 7M-GTE
doing up: MA61 5M-GZE-U with TAVAS ???
for sale EE90
soarer 4.6L V8 twin turbo sold before i finished it fully
datson 1200 SSS coupe & GA60 soon to be 7M-GTE
doing up: MA61 5M-GZE-U with TAVAS ???
for sale EE90
-
big_boy - Toyspeed Member
- Posts: 899
- Joined: Sun Sep 04, 2005 10:34 pm
- Location: dunedin
by strx7 » Thu Mar 29, 2007 11:26 pm
we had a guy at work doing work experience, who picked up a 12A turbo engine, complete with the turbo etc etc etc bolted to it, just like a normal person picks up a bag of cement, that'd be approx the same weight as a 2E if not a tad more
Online Car Forums - Where Hui seems to take preference over Do-ey
HDJ81- 112AWKW @ 10psi), FC3S (Tarmac Spec 335rwhp@11psi), 3SGTE stroker - replacement body found.
Motorsport Bay of Plenty - http://www.mbop.org.nz
HDJ81- 112AWKW @ 10psi), FC3S (Tarmac Spec 335rwhp@11psi), 3SGTE stroker - replacement body found.
Motorsport Bay of Plenty - http://www.mbop.org.nz
- strx7
- Toyspeed Member
- Posts: 3707
- Joined: Mon May 24, 2004 12:06 am
- Location: Tauranga
by Chickenman » Thu Mar 29, 2007 11:52 pm
Could always rebuild it, we just did our 2e. New HG, rings, bearings, valve grind, valve stemmy things.
Baby Jesus
-
Chickenman - I Am The Walrus!
- Posts: 3554
- Joined: Thu May 29, 2003 11:29 am
- Location: CHCH
by thaphatty » Fri Mar 30, 2007 12:07 am
BZG|Bling wrote:thaphatty wrote:seen a biiiiig samoan guy stagger off with a 2E from the "$50 for all you can carry" section of a wrecker yard
are you serious?
Yep. good times at the wreckers.
another time, maori guy came in, after a "neuveate" (New V8) for a falcon or something, anyway
mate shows him 2 motors, 1 in mint condition (runner/tested etc), 1 unknown (no warranty etc).
Maori guy looks hard at both motors, grabs the fan on the first one (the mint one) spins it, it whirls round.
Grabs the fan on the unknown motor, tries to spin it, it doesnt move.
Instantly looks up to my mate "Yeah i'll take the unknown one". Mate is like "why are you taking that one? when i've just championed this other one as being mint??"
"Au, its got no comphresshion"
Adamal wrote:Harro, this your captain speaking. Wercome to fright free nine five to Werrington
-
thaphatty - Toyspeed Member
- Posts: 1172
- Joined: Thu May 22, 2003 7:55 pm
- Location: Hamilton
10 posts
• Page 1 of 1
Return to General Car Discussion
Who is online
Users browsing this forum: No registered users and 27 guests