TA22 celica with SR20 - plz comment

General discussions on all non technical car related topics

Moderator: The Mod Squad

Postby Mr Revhead » Fri Aug 11, 2006 5:23 pm

ages = forever! :lol: but he'll get there



pffft slideways your just biased therefore your opinion cant count :wink:
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby JustinSpiderholden » Fri Aug 11, 2006 5:30 pm

mr pad wrote:
Mr Revhead wrote:well same goes for the 800+ RBs. and rotors etc etc.....


and any 3sgte you can get to make 600hp cozmo...

sr's are not over-rated. did one of your mates tell you that? they are wicked tough motors from factory, and are reliable as piss as long as you dont let your oil turn to sludge. So its not a toyota motor... omg. your going to hell etc...


Do you not undertand the term classic, the reasoning for not putting a sr20det into a ta22 is not mainly based on the fact that the sr20det is heavly overrated is more due to the fact that the ta22 is a classic toyota and should not be ruined buy putting a nissan motor between its front struts

its like buying a cosworth 190e and pulling the cosowrth motor to replace it with a 13b

thats my point a classic toyota needs a toyota engine of great heritage

here comes the 3sgte, great rally heritage i belive a few wrc world championships to :P

the sr20 will never ever be right in a ta22 imo

Mr Revhead, hehe he's lving up in tauranga now and the celica still in nelson i've seen his stock pile of parts so should be all good once he gets it up here and starts work on it again, i give him 15 years :P
JustinSpiderholden
Toyspeed Member
 
Posts: 978
Joined: Thu Jun 06, 2002 11:40 am

Postby RS13 » Fri Aug 11, 2006 5:30 pm

Adydas wrote:A few hundred? man ive been ripped off.


I saw a rwd 1S Corona out at the Waimak a few weeks ago, had been kicked in pretty bad, had a 5spd gearbox though.. isn't that what you want? A W gearbox with an S bellhousing? Take a toolkit out on a Sunday arvo, get a free gearbox, otherwise I've seen a couple at wreckers.

Silvertop wrote:I'm a tad biased mind you


Hahah, me too. I don't agree with;

gmacrae wrote:The SR20 is one of the only 4cyl jap engines i'd never want to own, they were built to be cheap - that is all. Every other jap dohc 2l 4cyl on the road is better designed. Yes you can make them go fast, you can make a morris 1800 go fast if you really want to, but its still rubbish.


If they're such "rubbish", then why did they start making them in 1986, up until a couple of years ago, without really changing the basic design? They're everywhere! Drifters, track racers, street cars, drag cars.. if they're so cheap and nasty as you say, then why would everybody have them?
Last edited by RS13 on Fri Aug 11, 2006 5:31 pm, edited 1 time in total.
Daily driver: Toyota RunX/Toyota Caldina
Ex: 2x AE101, 5x KP60, KP61, EP71, 3x KE70, KE72, AE70, AE82, 2x TE71, AE90, AE92, ST170, plus 11 Hondas, 12 Nissans, 6 Fords, 4 Mazdas, 3 Mitsis, an Isuzu and a Lada!

Image
User avatar
RS13
Toyspeed Member
 
Posts: 3580
Joined: Tue Oct 07, 2003 9:07 pm
Location: Christchurch

Postby Silvertop » Fri Aug 11, 2006 5:30 pm

Mr Revhead wrote:pffft slideways your just biased...

Check who posted that again ;) You've got me confused with Gav?
User avatar
Silvertop
Toyspeed Member
 
Posts: 1256
Joined: Thu May 16, 2002 11:38 am
Location: Auckland - Northshore

Postby Mr Revhead » Fri Aug 11, 2006 5:33 pm

bah stfu :lol:
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby JustinSpiderholden » Fri Aug 11, 2006 5:33 pm

RS13 wrote:
Adydas wrote:A few hundred? man ive been ripped off.


I saw a rwd 1S Corona out at the Waimak a few weeks ago, had been kicked in pretty bad, had a 5spd gearbox though.. isn't that what you want? A W gearbox with an S bellhousing? Take a toolkit out on a Sunday arvo, get a free gearbox, otherwise I've seen a couple at wreckers.

Silvertop wrote:I'm a tad biased mind you


Hahah, me too. I don't agree with;

gmacrae wrote:The SR20 is one of the only 4cyl jap engines i'd never want to own, they were built to be cheap - that is all. Every other jap dohc 2l 4cyl on the road is better designed. Yes you can make them go fast, you can make a morris 1800 go fast if you really want to, but its still rubbish.


If they're such "rubbish", then why did they start making them in 1986, up until a couple of years ago, without really changing the basic design? They're everywhere! Drifters, track racers, street cars, drag cars.. if they're so cheap and nasty as you say, then why would everybody have them?


um sr20 was not made since 1986 i think ull find that was ca18 :P sr20det is alot latter modle, 3sgte thou
JustinSpiderholden
Toyspeed Member
 
Posts: 978
Joined: Thu Jun 06, 2002 11:40 am

Postby mr pad » Fri Aug 11, 2006 5:51 pm

JustinSpiderholden wrote:Do you not undertand the term classic, the reasoning for not putting a sr20det into a ta22 is not mainly based on the fact that the sr20det is heavly overrated is more due to the fact that the ta22 is a classic toyota and should not be ruined buy putting a nissan motor between its front struts

its like buying a cosworth 190e and pulling the cosowrth motor to replace it with a 13b

thats my point a classic toyota needs a toyota engine of great heritage

here comes the 3sgte, great rally heritage i belive a few wrc world championships to :P

the sr20 will never ever be right in a ta22 imo

Mr Revhead, hehe he's lving up in tauranga now and the celica still in nelson i've seen his stock pile of parts so should be all good once he gets it up here and starts work on it again, i give him 15 years :P


its nothing like putting a 13b in a cosworth 190e....

its an old toyota, you are putting a new motor in it. If I shaved off the toyota on the cam covers, and the same with the nissans, would you still care? If so, then congrats. You are smart.
User avatar
mr pad
Toyspeed Member
 
Posts: 2707
Joined: Wed Nov 10, 2004 8:45 am
Location: Christchurch

Postby JustinSpiderholden » Fri Aug 11, 2006 5:58 pm

mr pad wrote:
JustinSpiderholden wrote:Do you not undertand the term classic, the reasoning for not putting a sr20det into a ta22 is not mainly based on the fact that the sr20det is heavly overrated is more due to the fact that the ta22 is a classic toyota and should not be ruined buy putting a nissan motor between its front struts

its like buying a cosworth 190e and pulling the cosowrth motor to replace it with a 13b

thats my point a classic toyota needs a toyota engine of great heritage

here comes the 3sgte, great rally heritage i belive a few wrc world championships to :P

the sr20 will never ever be right in a ta22 imo

Mr Revhead, hehe he's lving up in tauranga now and the celica still in nelson i've seen his stock pile of parts so should be all good once he gets it up here and starts work on it again, i give him 15 years :P


its nothing like putting a 13b in a cosworth 190e....

its an old toyota, you are putting a new motor in it. If I shaved off the toyota on the cam covers, and the same with the nissans, would you still care? If so, then congrats. You are smart.


yes i would care its the princalpal of it all aye, id never buy a datsun 1600 and put a 4age in or a 3sgte in it for that matter it would get a fj20 or sr20, same princalpal if you guys love the sr20det so much i think you should be posting on another forum could i suggest

www.animalfeltchers.com :P
JustinSpiderholden
Toyspeed Member
 
Posts: 978
Joined: Thu Jun 06, 2002 11:40 am

Postby DRFTIN » Fri Aug 11, 2006 6:01 pm

i would say putting any modern 2litre turbo in that car is ruining it, no matter who made it

i do have to say i've seen more 3S fail than SR and i know a lot more people with SR's. mine only died cos i cooked it to bits :P
but i wont get into the 3S vs SR battle cos i'm biased too
User avatar
DRFTIN
Toyspeed Member
 
Posts: 1106
Joined: Tue Nov 19, 2002 6:39 pm
Location: Chch

Postby JustinSpiderholden » Fri Aug 11, 2006 6:05 pm

imo, the best motor for the application to keep with the earn turly would eiather be a 3tgte or a really worked 2tg with 45mil webbers, huge cams, all lightend and balanced, ohhhhhhhhh yeahhhhhhhhhh
JustinSpiderholden
Toyspeed Member
 
Posts: 978
Joined: Thu Jun 06, 2002 11:40 am

Postby gmacrae » Fri Aug 11, 2006 6:08 pm

RS13 wrote:If they're such "rubbish", then why did they start making them in 1986, up until a couple of years ago, without really changing the basic design? They're everywhere! Drifters, track racers, street cars, drag cars.. if they're so cheap and nasty as you say, then why would everybody have them?


Not baggin ur ride man, i've actually got a soft spot for the 180s, but the reason the SR's are so popular and have been such a success is BECAUSE they're cheap (the current high price for a rwd sr20 engine/box is only because of the drift scene). Nissan designed a very economical engine in the SR, slap a decent turbo on it and whaddaya know they seem to go pretty well too, but technically speaking, they're a fairly unimpressive setup. If Nissan wanted a technically superior engine they would've been better to build on the CA engines, but that wasn't what they wanted.

So now we have established the 3S is the superior engine, thats plus 1 for the 3S, then there's the fact that, like Justin said, you just cant do that to a car as iconic and historically cool as a TA22.

The person in question has already put a fairly high hp sr20 in a HiAce van as his last project, this wasn't so bad, i mean, its a hiace - who cares.

But not a TA22!!! ahaa 5pm now the argument should really start swinging :)
User avatar
gmacrae
Toyspeed Member
 
Posts: 1194
Joined: Wed Nov 06, 2002 11:13 pm
Location: Rotorua

Postby Ako » Fri Aug 11, 2006 6:21 pm

Starion 4G63 block + VR4 head + Starion gbox + evo turbo setup = 3s... what?

All for approx $Fckall too.
User avatar
Ako
Toyspeed Member
 
Posts: 776
Joined: Sun Aug 10, 2003 12:51 pm
Location: Elsewhere

Postby gmacrae » Fri Aug 11, 2006 6:34 pm

Ako wrote:Starion 4G63 block + VR4 head + Starion gbox + evo turbo setup = 3s... what?

All for approx $Fckall too.


Dude, we're not trying to get an entire setup for a grand here, this is a big budget build and he's got access to all the gear to do the custom fab stuff. Starion shit belongs in a starion, thank god there are $&#$% all of them on the road these days.
User avatar
gmacrae
Toyspeed Member
 
Posts: 1194
Joined: Wed Nov 06, 2002 11:13 pm
Location: Rotorua

Postby Mr.Phreak » Fri Aug 11, 2006 6:57 pm

1UZ, it fits better than a 1JZ :D .....Just

Or do it the easy way and buy a rear ended tezza
Image
User avatar
Mr.Phreak
Toyspeed Member
 
Posts: 2700
Joined: Wed Jan 26, 2005 6:10 pm
Location: Gisborne

Postby gmacrae » Fri Aug 11, 2006 7:04 pm

Mr.Phreak wrote:Or do it the easy way and buy a rear ended tezza


Good idea, will mention that.
User avatar
gmacrae
Toyspeed Member
 
Posts: 1194
Joined: Wed Nov 06, 2002 11:13 pm
Location: Rotorua

Postby Mr_procrastination » Fri Aug 11, 2006 8:16 pm

LOL love this thread, yea I got a couple of these old celicas both with 3s in. One in neslon and another in Auckland,(hi juston and Worick, hope i can live up to the reputation you guys are building for me :p, hows it going. and nar my plans arent that long term, should have the Ra28 going by the end of the year, lol fingers crossed).
Its just a nice thing to do. If the guy has had the expereance putting a sr into every thing but the kitchen sink, then its high time he had a go at expanding his skill base. To to mention the fun of taking something good like a 3s and turn it into something better,aka.. a rear wheel drive 3s :)
sure there is a bit more work in it but you got to count the RESPECT Ull get from the job too.
User avatar
Mr_procrastination
Toyspeed Member
 
Posts: 240
Joined: Fri Aug 11, 2006 6:41 pm
Location: Tauranga

Postby Mr_procrastination » Fri Aug 11, 2006 8:29 pm

And of couse he will already understand the large amount of $$$ thats going to go into any high hp setup so why not do it right.
There is enough aftermarket ecu setups around to be able to chuck the back of the dizzy away and not need to cut the firewall. so no problam there.
User avatar
Mr_procrastination
Toyspeed Member
 
Posts: 240
Joined: Fri Aug 11, 2006 6:41 pm
Location: Tauranga

Postby Adamal » Fri Aug 11, 2006 10:33 pm

Whats with all this SR hating???

They're a good engine!! They really go the distance, just like the 3S. The only real major downfall is the oil squirters over the cams being too small.
They're fine if you service them every 10,000kms, but most of us would do it in almost half that anyway!

I've seen the results of an over-due service (By 20,000kms) and the cam lobes were rough as sandpaper, due to the oil feeds being blocked and starving them of oil.

If you ask me, the 3S and the SR are on par with each other, in terms of reliability and of power output (Well, in turbo models. Toyota put a bit more effort in the N/A catagory)

Man.... Whats with all the haters. Toyota and Nissan are brothers in arms!
Motorsport is like sex. You could take it to track and have a long, enjoyable session, or you could take it to the strip and get it over with in less than 20 seconds.
User avatar
Adamal
Toyspeed Member
 
Posts: 11592
Joined: Sun May 02, 2004 4:01 pm
Location: Waitakere Drift Stage (Ranges)

Postby Lloyd » Sat Aug 12, 2006 12:15 am

I vote for a 3T-GTE. Stick with something old and Toyota, can still get a bit of go out of them
User avatar
Lloyd
** Moderator **
 
Posts: 6195
Joined: Tue Oct 15, 2002 1:50 pm
Location: Dunedin

Postby gmacrae » Sat Aug 12, 2006 12:47 am

HRT wrote:I vote for a 3T-GTE. Stick with something old and Toyota, can still get a bit of go out of them


its pretty tricky getting 400kw out of a 3T buddy
User avatar
gmacrae
Toyspeed Member
 
Posts: 1194
Joined: Wed Nov 06, 2002 11:13 pm
Location: Rotorua

PreviousNext

Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 30 guests