Toyspeed.org.nz Message Board

by **escortman** » Tue Dec 19, 2006 11:04 pm

will a ae101 lsd box and shafts fit into ae82?

by **Bazda** » Wed Dec 20, 2006 6:53 am

escortman wrote:will a ae101 lsd box and shafts fit into ae82?

yes but u will need to run a gtz clutch and flywheel, unless you get the 4age clutch plate resplined.

by **crispy'86** » Fri Dec 22, 2006 10:58 am

Bazda wrote:i can have pics later on

Have you got pics so i can determine if i may by some fluke have an aw11 box?

by **Mr Revhead** » Fri Dec 22, 2006 12:19 pm

thats easy, dont need pics
aw11 has shifters on the opposite size from FWD

by **TRD_ZERO** » Sat Dec 23, 2006 10:49 am

What does the electric speedo sensor look like compared to the mechanical one? So i know what im looking for.

by **bluemaumau** » Sat Dec 23, 2006 10:51 am

one has a plug one has a screw on cable

by **TRD_ZERO** » Sat Dec 23, 2006 3:58 pm

Are the two sensors interchangable? Like if i took the electro one off my c56 grearbox and put it on my ae92 gtz box

by **bluemaumau** » Sat Dec 23, 2006 10:11 pm

you need e series sensors for e series boxes and c series sensors for c series boxes, trust me, been there done that!

by **TRD_ZERO** » Sun Dec 24, 2006 11:04 am

so the one off my c seires wont fit the e series ill have to get a e series sensor if i want to run it?

by **crispy'86** » Sun Dec 24, 2006 12:13 pm

bluemaumau wrote:you need e series sensors for e series boxes and c series sensors for c series boxes, trust me, been there done that!

That's what the man said

by **bluemaumau** » Sun Dec 24, 2006 5:36 pm

ncea eh

by **crispy'86** » Thu May 10, 2007 10:59 pm

after thinking and checking all my other boxes, late model ae92's and ae101's all have the hex bar through the middle of them to determine if it's lsd or not.
What about if your ae92 box has an lsd, you can't determine if it is by turning the axles and looking through the axle holes doesn't help you any??
Strip the box down and physically check it?

by **crispy'86** » Thu May 10, 2007 10:59 pm

after thinking and checking all my other boxes, late model ae92's and ae101's all have the hex bar through the middle of them to determine if it's lsd or not.
What about if your ae92 box has an lsd, you can't determine if it is by turning the axles and looking through the axle holes doesn't help you any??
Strip the box down and physically check it?

Toyspeed.org.nz Message Board

AE92 GTZ gearbox/ ae101, how do i tell the difference

Who is online