where can find these dam bolts!

[NOLAW]

ok i cant find them anywhere, im looking for some cap screw style bolts that have a flater/rounder head with and allen key pattern, iv seen people use them when bolting on gaurds, radiators etc, they look far tidyer than standard bolts and im at the stage where im putting everthing back into a newly painted engine bay so if anyone knows what im talking about please help me out on where to get some

cheers

[trd_chik]

ok i cant find them anywhere, im looking for some cap screw style bolts that have a flater/rounder head with and allen key pattern, iv seen people use them when bolting on gaurds, radiators etc, they look far tidyer than standard bolts and im at the stage where im putting everthing back into a newly painted engine bay so if anyone knows what im talking about please help me out on where to get some

cheers

howmany do you need and wat size??
(have some)

[Rick]

You talking about these? Think they call them "Button Head"

[NOLAW]

howmany do you need and wat size??
(have some)

at this stage im after 4x 6mm dia ones and 4x 4mm dia ones

and yeah 'rick' those are the ones im after, can you get rubber washers for them? (to prevent paint chipping etc)

[trd_chik]

howmany do you need and wat size??
(have some)

at this stage im after 4x 6mm dia ones and 4x 4mm dia ones

and yeah 'rick' those are the ones im after, can you get rubber washers for them? (to prevent paint chipping etc)

can do..how long? and no dont have rubber washers but have stainless washers if needed

[Bazda]

dowdee or soemthing washers is what you want. has rubber moulded to a steel washer basically so it has some strength to it.

[NOLAW]

is allgood, have decided to just go with normal cap screws as they still look the part, any idea where i can get some of these rubber moulded washers baz?

[TRD Man]

Why not let your fingers do the walking and look in the Yellow Pages under 'fasteners'.
If you're in Wellington, Schrodoco will probably have everything you're looking for.

[MrOizo]

Any bolt shop will be able to help you. will find these are cheap assssss

[NOLAW]

im back up in the bay now, should be able to sort things out now maself from here onwards, cheers guys

[ee904age]

Dowty washers is what they're called, places like Dotmar/Engineering plastics do them. Or else go buy/find some roofing nails or tek screws and pull the washers off them

[evil_si]

dowdy washers are common on banjo bolts, and fittings in hydraulic systems,

any hose shop like hydralink or enzed should be able to help you out,

as for the bolts try atom fasteners in auckland, they will send them and are cheap

the rubber is only a small piece in the middle of a steel washer

[Stott69]

msl/fourtes fastners, theres one in the mount up there im sure of, but should have some one closer