Toyspeed.org.nz Message Board

by **ke_25** » Mon Oct 03, 2011 7:56 pm

Hey,

Does anyone have off hand the torque settings for the pressure plate and flywheel bolts on a 4age 20v. I am running ARP flywheel bolts if it makes any difference.

Cheers,
Shaun

by **QikStarlie** » Mon Oct 03, 2011 8:26 pm

need to torque the arp's to what arp recommend for there bolts. im sure google will tell you, if you don't have the packaging anymore

by **ned07** » Mon Oct 03, 2011 8:31 pm

http://arpinstructions.com/index2.php?s ... bolts-home Just enter your kit number and it should give you the values.

by **allencr** » Tue Oct 04, 2011 6:10 am

ke_25 wrote: ... ARP flywheel bolts if it makes any difference.

Their value comes from tightening them more. Tension.
If the fastener is only in shear, then it would do more & be stronger then the factory stuff without being tightened more, otherwise the improvement comes from holding the parts together more tightly.

red car · by pc » Thu Oct 06, 2011 6:48 pm

Haynes manual says:

Clutch pressure plate-to-flywheel bolts = 14 ft-lbs
Flywheel bolts = 58 ft-lbs

Toyspeed.org.nz Message Board

4AGE Clutch/Fywheel torque settings

4AGE Clutch/Fywheel torque settings

Re: 4AGE Clutch/Fywheel torque settings

Who is online