hey im looking at buying a new gear box for my blacktop 4age are the E58 from the AE101 4AGZE and if so how do i no for sure its a E58 box will it have it stamped some where ??
any help would be good cheers
E58 gear box
Moderator: The Mod Squad
11 posts
• Page 1 of 1
E58 gear box
by ae92nut » Mon Oct 10, 2011 4:32 pm
AE92 levin - 20v black top
AE92 levin - 16v red top (crashed) :'(
mini clubman 1275cc track car (project)
AE92 levin - 16v red top (crashed) :'(
mini clubman 1275cc track car (project)
- ae92nut
- Toyspeed Member
- Posts: 24
- Joined: Tue Sep 27, 2011 12:36 pm
- Location: christchurch
by ~SlideWays~ » Mon Oct 10, 2011 4:46 pm
Wouldn't use a E58 on a Blacktop, it would suck the life out of it. They have very long gears since they are designed for the bottom end torque of the 4agze.
Don;t think there is an E58 stamped anywhere on them.
If you just want it for the LSD, get a C56 instead.
Don;t think there is an E58 stamped anywhere on them.
If you just want it for the LSD, get a C56 instead.
-
~SlideWays~ - Toyspeed Member
- Posts: 4974
- Joined: Sat Nov 23, 2002 3:02 am
- Location: Wellington
by ae92nut » Tue Oct 11, 2011 12:15 pm
aw buga thats not what i wanted to hear haha but it will be beter than my one for now mines about to pop do they bolt straight up no problems?? like cv shaffs inputs are the same ??
AE92 levin - 20v black top
AE92 levin - 16v red top (crashed) :'(
mini clubman 1275cc track car (project)
AE92 levin - 16v red top (crashed) :'(
mini clubman 1275cc track car (project)
- ae92nut
- Toyspeed Member
- Posts: 24
- Joined: Tue Sep 27, 2011 12:36 pm
- Location: christchurch
by ~SlideWays~ » Tue Oct 11, 2011 12:26 pm
ae92nut wrote:aw buga thats not what i wanted to hear haha but it will be beter than my one for now mines about to pop do they bolt straight up no problems?? like cv shaffs inputs are the same ??
Bad news again, E58 LSD has specific shafts. Bellhousing bolts will line up fine its the same engine block.
-
~SlideWays~ - Toyspeed Member
- Posts: 4974
- Joined: Sat Nov 23, 2002 3:02 am
- Location: Wellington
by Mr Revhead » Tue Oct 11, 2011 12:47 pm
ae92nut wrote:aw buga thats not what i wanted to hear haha but it will be beter than my one for now mines about to pop do they bolt straight up no problems?? like cv shaffs inputs are the same ??
E58 is just about the worst thing you could hope to bolt in there.
Go search out a C56 box
-
Mr Revhead - SECURITY!
- Posts: 24635
- Joined: Tue Jan 20, 2004 4:06 pm
- Location: Nelson
by headshotnz » Tue Oct 11, 2011 1:34 pm
Get one from pick a part for $120ish, i picked up 2 c56-04c's (LSD) from there for that price 
Current: UCF20 NZ New LS400,
(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)
Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)
Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
- headshotnz
- Toyspeed Member
- Posts: 699
- Joined: Thu Oct 30, 2008 7:39 pm
- Location: Johnsonville
by rollaholic » Tue Oct 11, 2011 3:06 pm
thats for two right - boxes are normally 60ish arent they?
BASU!
-
rollaholic - Toyspeed Member
- Posts: 5383
- Joined: Fri May 28, 2004 2:19 am
- Location: West is Best
11 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 14 guests