RWD options for 2GR-FZE

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

RWD options for 2GR-FZE

Postby cogent » Wed Nov 16, 2011 5:54 pm

Long story short, we have a TRD Aurion 2GR-FZE and we want to run it in a north-south config for a race car build. What are our options in regard to this? I'm not familiar enough with the intricacys of mixing/matching boxes and engines to efficiently research it, although it looks like a hilux 1g bell housing will bolt up?

V160 would be great but I don't like our chances of finding one, how hard would it be to adapt a rb25det or fd3s gearbox? We're after a strong, reliable performance orientated box without going to a straight cut race box.

Any ideas?
cogent
 

Postby deaf_rattle » Wed Nov 16, 2011 6:09 pm

v160, you would need to chop off the "bellhousing" part as its all one part with the gearbox.

the 300zx 5speed is a very strong box, otherwise id go r154.
User avatar
deaf_rattle
Old Skool User!
 
Posts: 8039
Joined: Fri May 17, 2002 1:32 pm
Location: right where he belongs

Postby cogent » Wed Nov 16, 2011 6:25 pm

I guess my question is more around what is the usual process for mating a gearbox to an engine, and with regards to the 2gr what bolt together options might we already have?
cogent
 

Postby nz_climber » Wed Nov 16, 2011 7:00 pm

Have a read here, its a 2gr going into a MR2, and uses a 3s bellhousing and box..

http://forums.toyspeed.org.nz/viewtopic.php?t=78710

working with that logic you should be able to use anything that came s series bellhousing, which include w series, also the altezza j160 (probably not the strongest, but I am sure there will be more options out there)

Otherwise you will be up for building a adapter plate or bellhousing..
nz_climber
Toyspeed Member
 
Posts: 322
Joined: Sat Dec 20, 2003 10:29 pm
Location: Bulls

Postby strx7 » Wed Nov 16, 2011 8:14 pm

w57 with a S series or C series bell housing or try a J160 Altezza box and see how it stands up, depending on what it is going into, it MAY handle some abuse.
Online Car Forums - Where Hui seems to take preference over Do-ey

HDJ81- 112AWKW @ 10psi), FC3S (Tarmac Spec 335rwhp@11psi), 3SGTE stroker - replacement body found.

Motorsport Bay of Plenty - http://www.mbop.org.nz
strx7
Toyspeed Member
 
Posts: 3707
Joined: Mon May 24, 2004 12:06 am
Location: Tauranga

Postby wde_bdy » Wed Nov 16, 2011 9:02 pm

Search www.Toymods.org.au forum, pretty sure there was at least one RWD version there.

Callum
User avatar
wde_bdy
Toyspeed Member
 
Posts: 2704
Joined: Wed Oct 23, 2002 11:43 pm
Location: Gisborne

Postby KinLoud » Wed Nov 16, 2011 10:48 pm

Some late model (2002 onwards says wikipedia) Hilux have a 1GR-FE - the 4litre version of the 2grfe.
Go find bell and gearbox from one of these maybe

Ken
I used to think that the orange and green tictacs gave you special powers. The orange ones would make you stronger and the green ones would make you faster. So i used to eat some green ones and run around my lounge as fast as i could, then eat the orange ones and try to pick up the sofa. I wish it were true!
User avatar
KinLoud
** Moderator **
 
Posts: 2893
Joined: Thu May 16, 2002 7:39 pm
Location: Auckland

Postby Soiled » Wed Nov 16, 2011 11:15 pm

Altezza boxes are stronger than people give them credit for, if you keep oil changes up and don't be stupidly harsh on it.

Mines been on a turbocharged 3S at 200kw for about 50,000ks and 275kw for about 15,000ks with a couple track days in there and never given me problems.

But have known a couple not be so lucky, so could be worth giving it a go as they are relatively cheap (compared to r154) and if it's an easy fit.
Soiled
Toyspeed Member
 
Posts: 93
Joined: Sat Sep 04, 2010 4:05 pm


Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 20 guests