Toyspeed.org.nz Message Board

by **lvn_mr2** » Tue Aug 24, 2004 10:27 pm

i know it sounds really pathetic, but could i put a Sc12 on my 3alu? being the shitty ol asian carb sittin there n all. how would i set the whole shibang up? anyone ever tried it? and plz dont say "put a 4agze in" or "put a 4ag init".

by **Ae92typeX** » Tue Aug 24, 2004 10:37 pm

could be done, but will be a bit of work and may not last to long if the engine is kept as it. would need to fabricate several bits, but pleanty of carby cars have been s/c'd before.

Carina AA63 · by **kingcorolla** » Tue Aug 24, 2004 10:40 pm

personaly i think ure wasting your time.
3a's are a shitthouse engine. dont waste your time trying to rig up a blower to blow under the carb. too much time to spend on that engine i reckin. plus the power gains would not make up for the cash spent, and if u are wanting high boost, then u will have to re-do the internals to handle it. But if u REALY want to im sure it could be done, and would be an interesting and original setup.

jus put a gze in it...

Whats all this then? · by **liftback** » Tue Aug 24, 2004 11:10 pm

Like the guy above said... the 3a is a peice of the shite, not worth wasting money on. Of course if you're dead set on doing it then go ahead...

or just put a gze in...

or better yet go turb because s/c is dumb

by **lvn_mr2** » Wed Aug 25, 2004 9:18 am

haha yea i can agree the engine is a shithouse, but the car is worth more with that THING in there than a gze or 4age.

what would be required in such a set-up?

i reall dont want to do it, but putting a 4age or something it is just a shame really, and yes i dont think the 4agze is that great, well the AFM version anyway...

by **EVLGTZ** » Wed Aug 25, 2004 9:27 am

lvn_mr2 wrote:haha yea i can agree the engine is a shithouse, but the car is worth more with that THING in there than a gze or 4age.

what would be required in such a set-up?

i reall dont want to do it, but putting a 4age or something it is just a shame really, and yes i dont think the 4agze is that great, well the AFM version anyway...

why would it be worth more with a puss 3A in there?

If it was then surely it wouldn't be once a s/c had killed it?

best to do it once and do it right and go ze or 4age

Whats all this then? · by **liftback** » Wed Aug 25, 2004 10:07 am

Well if its worth so much with a shithouse 3a in it, then it sounds like it needs to be kept in completely original condition to stay at that value. Which would mean no s/c. Besides, you'll most likely kill the engine trying to run a s/c on it, not to mention how much money it will cost.

by **lvn_mr2** » Wed Aug 25, 2004 10:08 am

its a factory carby mr2...AW10 only 1542 ever produced. mines number 649 lol. these were factory 3alu and most people have put in 4a's. these are worth more with a 3alu according to the people that did my car valuation. but just na power in there is so pathetic, its umm....FREAKIN SLOW!

anyone got pics of a blowen 3a?

by **thaphatty** » Wed Aug 25, 2004 4:52 pm

give andrew his $140 you c**t.

maybe you shouldnt be spending money on mods when you owe other people :wink:

by **Mr Revhead** » Wed Aug 25, 2004 5:34 pm

hmm is a aw10 with carby 3a really worth anything? i mean who wants one? theres a few here and no one wants them! come take em all away!

by **Lloyd** » Wed Aug 25, 2004 5:39 pm

If its worth more with the factory engine in then modifying the factory engine isn't going to help it hold any value

by **thaphatty** » Wed Aug 25, 2004 6:37 pm

Mr revhead: serious???? how much??!?!?

by **Liloss** » Wed Aug 25, 2004 7:28 pm

Mr Revhead wrote:hmm is a aw10 with carby 3a really worth anything? i mean who wants one? theres a few here and no one wants them! come take em all away!

i suppose you have a few hundred Super Editions that everyone can come take away aswell??!! a friend sold a mint cond & original one to a collector with 100,000K's for $10,000...must be worth something!

Whats all this then? · by **liftback** » Wed Aug 25, 2004 9:36 pm

What a waste of money. There is no way I would pay more for a low-spec version of a car if i could get the high-spec version for a fraction of the price!

by **Ae92typeX** » Wed Aug 25, 2004 9:55 pm

Liloss wrote:
Mr Revhead wrote:hmm is a aw10 with carby 3a really worth anything? i mean who wants one? theres a few here and no one wants them! come take em all away!

i suppose you have a few hundred Super Editions that everyone can come take away aswell??!! a friend sold a mint cond & original one to a collector with 100,000K's for $10,000...must be worth something!

Must be some rich collector. One of the guys I worked with got an aw10 for $1500 about a year ago. Maybe cos it was auto it wernt worth another 8500?

But yea, as said above. If you want to keep it origional for the value sake, then putting a s/c on aint really the best idea.

by **oldskoolmr2** » Thu Jul 28, 2005 10:54 pm

i have one of these... Weber carb+k&n Filter= alot mre performance maybe a better xhaust system. wen i called up to ask for a quot to turbo mine the guy sed its a real waste the gearbox etc would blow realllllyyyy fast as the engine cannot handle the power

by **MR2SIK** » Thu Jul 28, 2005 11:04 pm

Liloss wrote:
Mr Revhead wrote:hmm is a aw10 with carby 3a really worth anything? i mean who wants one? theres a few here and no one wants them! come take em all away!

i suppose you have a few hundred Super Editions that everyone can come take away aswell??!! a friend sold a mint cond & original one to a collector with 100,000K's for $10,000...must be worth something!

were you meaning sold the superedition for $10,000?

cos there was only like 250 of them built and they were the highest of the high spec, would be worth a mint to the right person

by **Ae92typeX** » Fri Jul 29, 2005 9:19 am

wow, pulling up the old threads- this is almost a year old!

Toyspeed.org.nz Message Board

SC12 on a 3alu?

SC12 on a 3alu?

Who is online