ok, im currently rebuilding a 4agze 16v ( afm model from a aw11 ). i've got the thing apart, and just having a quick look at the rods, they seem to be quite beefy. i have some silvertop 20v ones, but i havent compared side to side yet. are they any difference's? is it worth swapping the silvertop ones in? will only be running 14psi via supercharger ( pulley kit etc )
any info appreciated.
4age ROD question
Moderator: The Mod Squad
4 posts
• Page 1 of 1
4age ROD question
by lucasthefallen » Fri May 30, 2008 6:13 pm
Need Service or Repair work done? send me a PM
- lucasthefallen
- Toyspeed Member
- Posts: 425
- Joined: Tue Mar 01, 2005 8:02 am
- Location: Auckland
by Zak » Fri May 30, 2008 7:23 pm
The silver top ones are smaller, but I'm not sure what the strength differences would be.
Both are fine for fairly good power, so I wouldn't worry about it, just use the better condition ones.
Both are fine for fairly good power, so I wouldn't worry about it, just use the better condition ones.
- Zak
- Toyspeed Member
- Posts: 1373
- Joined: Tue Jul 20, 2004 10:18 pm
- Location: Auckland
by pc » Fri May 30, 2008 11:00 pm
Everything you need to know about 4age rods.
http://forums.toyspeed.org.nz/viewtopic.php?t=58213
Blacktop rods have an unusually high failure rate.
http://forums.toyspeed.org.nz/viewtopic.php?t=58213
Blacktop rods have an unusually high failure rate.
red car
1/4 mile - 14.683s @ 91.83mph
Manfield - 1:24s
Taupo - Track1 1:53s (road tyres) - Track2 1:22s - Track3 48s (with esses) - Track4 1:58s
1/4 mile - 14.683s @ 91.83mph
Manfield - 1:24s
Taupo - Track1 1:53s (road tyres) - Track2 1:22s - Track3 48s (with esses) - Track4 1:58s
-
pc - Toyspeed Member
- Posts: 1749
- Joined: Fri May 07, 2004 3:10 pm
- Location: Upper Hutt Yo!
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests