20v's - are the sh*t or are sh*t?

Burning questions of the day answered by the Toyspeed populace

Moderator: The Mod Squad

20v's - are the sh*t or are sh*t?

nah - they are crap
59
54%
yea - they are the shizzel
51
46%
 
Total votes : 110

20v's - are the sh*t or are sh*t?

Postby Dodgy Guy » Fri Jan 28, 2005 4:20 pm

well? are they good, bad or evil?
User avatar
Dodgy Guy
Toyspeed Member
 
Posts: 202
Joined: Thu Jul 08, 2004 11:04 am
Location: Auckland

Postby Dr-X » Fri Jan 28, 2005 5:35 pm

Oops, i voted wrongly :oops: I meant to say they're crap, but put 'yes they're the shizzle.
User avatar
Dr-X
Toyspeed Member
 
Posts: 1849
Joined: Tue Aug 20, 2002 11:41 pm
Location: Mauthausen

Postby pervert » Fri Jan 28, 2005 5:47 pm

I think the 20v driver mentality of believing they are driving the world's quickest road car is the main issue I have against them.
User avatar
pervert
Toyspeed Member
 
Posts: 4365
Joined: Wed Dec 08, 2004 8:03 am

Postby Sanxta » Fri Jan 28, 2005 5:47 pm

good all round cars, better than most NA 1600's up to 2000cc but shitty by performance car standards
Sanxta
Toyspeed Member
 
Posts: 1094
Joined: Tue Sep 16, 2003 6:18 pm
Location: AKL

Postby DJ » Fri Jan 28, 2005 6:06 pm

Bleh, 2.0L 16V for lyfe!


*incomming rant from cosmo iminment* :P
User avatar
DJ
Toyspeed Member
 
Posts: 2570
Joined: Fri Oct 22, 2004 9:37 pm
Location: Sydney, Australia.

Postby Dr-X » Fri Jan 28, 2005 7:14 pm

pervert wrote:I think the 20v driver mentality of believing they are driving the world's quickest road car is the main issue I have against them.


Well put, just what I was thinking.
User avatar
Dr-X
Toyspeed Member
 
Posts: 1849
Joined: Tue Aug 20, 2002 11:41 pm
Location: Mauthausen

Postby Adamal » Fri Jan 28, 2005 7:17 pm

I don't like the characteristics of the 20v. They are known to be shit outside of their 5000rpm-7000rpm powerband. Same goes for B16A's and the likes.

What would you rather race with? High power (relevent to capacity) in a narrow band or a bit less power over a more broad band? It's good to have some up and go in the lower rev range. Because realistically in a race, keeping it within a 2000rpm range the whole time is not gonna happen.

I don't mind 20v's, I just don't like drivers with the mentality like most Vtec drivers that think peak power is the be all and end all.

I'd rather go for a tuned 16v, or a Group A 20v that has a much wider powerband :D (Although its power starts at 6000rpm!)
Motorsport is like sex. You could take it to track and have a long, enjoyable session, or you could take it to the strip and get it over with in less than 20 seconds.
User avatar
Adamal
Toyspeed Member
 
Posts: 11592
Joined: Sun May 02, 2004 4:01 pm
Location: Waitakere Drift Stage (Ranges)

Postby Dodgy Guy » Fri Jan 28, 2005 8:08 pm

hehehe i like my 20v cos its the first "performance" car ive owned but im sure once ive had a few other drives ill change my mind.

dont like the fact silver tops are a pain in the ass to turbo :evil:
User avatar
Dodgy Guy
Toyspeed Member
 
Posts: 202
Joined: Thu Jul 08, 2004 11:04 am
Location: Auckland

Postby Twolitre » Fri Jan 28, 2005 8:09 pm

I'm not the biggest fan of 20V Levins but 20V AW11's are the shizzle
User avatar
Twolitre
Toyspeed Member
 
Posts: 1896
Joined: Wed May 15, 2002 4:43 pm
Location: Sydney/Auckland

Postby EVLGTZ » Fri Jan 28, 2005 9:34 pm

Utter shite

16v / morningside for lyfe
EVLGTZ
Ex 4AGTE AE101 Levin - 13.3@173km/hr
Ex BPT BFMR Familia - 13.8@168km/hr
Ex 4AGZE AE82 - 14.2@163km/hr

Current - 2000 Toyota Caldina GT, 2008 Ford Territory FPV
User avatar
EVLGTZ
Toyspeed Member
 
Posts: 2347
Joined: Fri May 17, 2002 10:05 pm
Location: On the rocks

Postby kingcorolla » Sat Jan 29, 2005 2:38 am

good motors.

too many valves.
1983 Carina AA63 4age
User avatar
kingcorolla
Toyspeed Member
 
Posts: 1222
Joined: Mon Jul 26, 2004 3:23 am
Location: christs church

Postby Urban_Cruiser » Sat Jan 29, 2005 8:33 am

I hav a 20v Silver top in my Marino. It goes alright from about 4500rpm.
But this is my first real preformance car. But i do see its limited interest.

Dodgy Guy wrote:dont like the fact silver tops are a pain in the ass to turbo


I'v been thinking of doing that to my one. Whats the problem?
Urban_Cruiser
 

Postby CozmoNz » Sun Jan 30, 2005 1:39 pm

good engines, but still 1600 high revving :).

next cars gonna be turbo :) when i have a better insurance record :)
Outta here on Dec 5th, 1630, WHOO HOO
Image
Rayne For President!
User avatar
CozmoNz
Toyspeed Member
 
Posts: 5490
Joined: Wed Aug 18, 2004 7:48 pm
Location: Brisbane, Australia

Postby Penny » Sun Jan 30, 2005 2:43 pm

pervert wrote:I think the 20v driver mentality of believing they are driving the world's quickest road car is the main issue I have against them.


I have a 20v and I don't think my car is the fastest in the world :wink:

You could be forgiven for saying that about me when I get my next 20v (audi s3, 1.8l 20v turbo). But that's not likely to happen in this lifetime :lol:
User avatar
Penny
Toyspeed Member
 
Posts: 659
Joined: Fri Jun 20, 2003 10:36 am
Location: Palmerston North

Postby V8MOFO » Sun Jan 30, 2005 4:07 pm

GT Girl wrote:
pervert wrote:I think the 20v driver mentality of believing they are driving the world's quickest road car is the main issue I have against them.


I have a 20v and I don't think my car is the fastest in the world :wink:

You could be forgiven for saying that about me when I get my next 20v (audi s3, 1.8l 20v turbo). But that's not likely to happen in this lifetime :lol:


I have 12 more valves than you :P

...you know i dont even know what valves do for a car.
Anger is seldom without argument but seldom with a good one.
Image
Image Fact of the day: I have only updated my fact of the day on time, Three times.
User avatar
V8MOFO
Toyspeed Member
 
Posts: 3004
Joined: Mon Nov 15, 2004 8:39 am
Location: I am crazy...

Postby Adamal » Sun Jan 30, 2005 8:59 pm

Try again. 4 more valves ;)

3 Valves per cylinder in a 1UZ.... Okashinaaaaaa....

And as for what valves to:

You've got the tappets which are pushed up against the valve with springs. Cam lobes rotate with cam shaft to push tappets down and make the valve 'open'. This lets the mixture of air and fuel into the cylinder.
After the combustion is complete, the other cam rotates and opens the exhaust valve, letting the remaining gasses out.
Motorsport is like sex. You could take it to track and have a long, enjoyable session, or you could take it to the strip and get it over with in less than 20 seconds.
User avatar
Adamal
Toyspeed Member
 
Posts: 11592
Joined: Sun May 02, 2004 4:01 pm
Location: Waitakere Drift Stage (Ranges)

Postby Dell'Orto » Sun Jan 30, 2005 9:30 pm

Adamal wrote:Try again. 4 more valves ;)

3 Valves per cylinder in a 1UZ.... Okashinaaaaaa....



Pssst, they have 32 valves all up ;)
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby Dr-X » Mon Jan 31, 2005 3:09 pm

User avatar
Dr-X
Toyspeed Member
 
Posts: 1849
Joined: Tue Aug 20, 2002 11:41 pm
Location: Mauthausen

Postby Tablets » Mon Jan 31, 2005 3:31 pm

haha whats the bet thats where Dr_X found out how an engine works :lol:
User avatar
Tablets
Toyspeed Member
 
Posts: 234
Joined: Thu Jan 27, 2005 8:15 pm
Location: under lock n key...

Postby Adamal » Mon Jan 31, 2005 4:34 pm

Mmm, Boost wrote:
Adamal wrote:Try again. 4 more valves ;)

3 Valves per cylinder in a 1UZ.... Okashinaaaaaa....



Pssst, they have 32 valves all up ;)


Really? I remember reading somewhere that they only had 24 valves, which I thought WAS quite strange.
Motorsport is like sex. You could take it to track and have a long, enjoyable session, or you could take it to the strip and get it over with in less than 20 seconds.
User avatar
Adamal
Toyspeed Member
 
Posts: 11592
Joined: Sun May 02, 2004 4:01 pm
Location: Waitakere Drift Stage (Ranges)

Next

Return to Polls

Who is online

Users browsing this forum: No registered users and 15 guests