Mr2 stud pattern

[MR2MAD]

does anyone know the PCD of a sw20 mr2 stud pattern i think its 114.5 but im not sure if someone could confirm this that would be great it would suck to buy mags that dont fit. CHEERS

[Al]

yer shes 5 x 114.3 mate

offset is an odd one to mate, you need around a 35-38 on the rear wheels

[MR2MAD]

cheers mate would a 45 offset be to big?

[Al]

well a 45 would sit really far in, if they are like 17"s they will more than likely rub the front strut and the rears will sit really far inwards

the higher the number the further in the wheels will sit

[Adamal]

I still don't understand all this 114.3 blah blah blah stuff.
Can someone explain it to me? Ta

[aesc]

Thats the measurement in mm from the centre of one stud to the centre of another stud on the diagonal or studs opposite each other

[JT]

http://www.chris-longhurst.com/carbibles/tyre_bible.html

A good read to explain things once and for all!

PCD and Offset is explained about 1/3 the way down.

[MR2MAD]

well a 45 would sit really far in, if they are like 17"s they will more than likely rub the front strut and the rears will sit really far inwards

the higher the number the further in the wheels will sit

Thanks thats a real help expecialy wen buy second hand mags