10mm Leads for 20v

[2Fast4vtec]

Hey does anyone know where you can buy good 10mm leads for 20v's from?

[rollas22]

im with you on that...... Maybe TRD make sumthing??

[sixspeeder]

let us no when you suss some, ill be keen
price etc

[Mr Revhead]

they certainly do!
pm me if ya want some!

[AceSniper]

thought TRD only made 5 or 7mm ones?

I found some NGK hyper silicon ones but they are 5mm aswell

[FLAWLES]

yea same wot give mr rev head????
i could only find ngk ones as well i was kinda hoping splitfire do them to be honest i havent tried for them yet

[TRD Man]

TRD leads forv 20V are 5mm. Size doesn't always matter.

[ROBODISCO_20v]

Lead size dosent make any diiference to the spark. All it is, is more insulation from heat to stop them breaking down as quickly. You cant get 10mm lead for 20v's off the shelf. you can get 5mm from anyshop in nz & 7mm ex japan that cost over $300. The problem is their special ends where they go into the dizzy. Now if you're running an aftermarket ECU like a link etc you can the run individual coil packs like the ae101 GTZ does. Then you can get some custom made lead to any size you want.
Did some one see the blue AE86(nite parts) at the drags with the silvertop 20v running 10mm leads?? this is the set up he has. Brendon & I made the leads at my work.

[AceSniper]

i could only find ngk ones as well i was kinda hoping splitfire do them to be honest i havent tried for them yet

http://www.interone.jp/~balance/history ... 020808.htm

I know splitfire do them for 20v's

I had some from repco then came accross the NGK ones on trademe near new for $40 .... wayyyy better than the champion ones