3sgte injectors......help required

[capri007]

i have a 18rgeu with 3tgteu injectors and i need more fuel as i have a feeling that it is going to run lean. at the moment i am boosting 5 psi and when i get my heavy duty clutch i am planning on turning that up to 9/10psi. which will be in the next week or so.

what i am wondering is do 3SGTE injectors have the same fittings as 3tgteu, or in other words will they fit directly into my inlet manifold with out leaking????????

if not the next option will have to be extra injectors but i have a large piece of samco hosing that i would prefer not to cut up and it is pretty tight so any help would be greatly appreciated.

thanks

[Twolitre]

2nd generation onwards 3SGTE injectors are side feed so forget them but if you can get your hands on a set of ST165 3SGTE or MA70 7MGTE injectors which are the same thing then you should be onto a winner.

[Malcolm]

I happen to have a set of 6 7MGTE injectors, 430cc/min, top feed, low impedance, all yours for $200.

[wde_bdy]

The common upgrade for 3T-GTE's is RX7 injectors around 550cc. Can't remember which model but a quick search of the net should find the info.

Callum

[capri007]

so are st165 injectors the same fittings as 18rgeu?? if they are they might be the go.