4agte in starlet, any one done it?

[kingcorolla]

well fwd water pipes, theres one main pipe down the block, which attaches to the thermostat, and the other pipe on block, is hot water return, and is plumbed the same.

Rwd have an outlet on the head (also) and the inlet on the waterpump.
the two pipes on the block (rwd), are for heater return, and hot feed for throttle body, as well as a return from the throttle.



the sensor block on the back of the head, is used for hot heater feed, and also hot throttle feed.

[terrytuffguy]

well I hope you know what your getting yourself into...........

Anyway the pipe that runs behind the waterpump runs to the bottom of the radiator as it's the return line. There is another main pipe that comes out under the left cam pulley and above the waterpump, this runs into the top of the radiator oviously. Easy as.......until you need to deal with two hoses that run out of the head, they circulate water through the thermostat housing that runs in series with the bottom hose.

It's best to look how it all works on a 4ag levin or fxgt corolla, I'm asuming this is a fwd 4ag.

[kingcorolla]

i spose its goes with any rwd 4agte,

dunno if you have fwd water pipes ore not, the ones in my pic are rwd.

[Al]

afaik thats terrytuffguy's

[3T-Rona]

any one no if the tin plate that goes between the block and the g.box is compatible from a fwd, this is for a rwd t-50.....
also kingcorolla, the pic u posted before didnt show up.
cheers

[dohca]

lol, do you like my rangi bonnet stand?

who made your manifold?

[3T-Rona]

lol, do you like my rangi bonnet stand?

who made your manifold?

hahaha nice
got the pipes of the aw11 i was talkin bout before, still short one tho, the smaller pipe that comes off the top radiator pipe, runs water to the plenum i think, need the lil pipe as i can use it for my turbo (water + oil cooled)