Help!! AE92 4agze a/c , p/s drive belt

[crispy'86]

How does the power steer drivebelt adjust on these?? I'm putting normal 4age into a gtz trueno i got guy i bought it off has the gze for his conversion. I am using the bracket for the power steer, air con pump and may be missing bracket to hold the power steer pump tight. Alternator is on intake side , any ideas, any pics, links?? i need to know a.s.a.p. if i need anything

[Banga69]

well from a gtz the belts a adjust by a pulley its right above the crank pulley u need a 14" socket to adjust it.

hope that helps

anyone else??

[crispy'86]

yeah the a/c pump tensioner is there but they run two belts, 1 for the a/c from the crank and one belt from a/c/ pump to p/s pump. I haven't seen any adjustment possible from this as i am probably missing a few brackets etc.

[JasonZE]

The ZE p/steer pump used a slot type bracket so you can swivel the pump till the belt is tight then lock the bolt , the slotted bracket is on the bottom of the pump if you dont have one it wont be hard to adapt an alternator one or similar to fit.