TRD bearing shell part No#'s

[kingcorolla]

hey guys, i have two sets of trd big-end shells, with two diofferent part numbers. Does anybody have the software to check the difference? if any?

13281-AE8013
13281-AE8011

For Bluetop 4age. both look identical. Thanx.

[ChaosAD]

I would have said to go to the trd site, but the english part of it doesnt seem to work http://trdparts.jp/english/.
Try using the jap site and a translator or hit up mr revhead.
Failing that, ive got it printed out but will have to hunt for it.

[Mr Revhead]

are those numbers right??

should be 13281-AE801-03 etc..

the 01, 02, 03 is the size
01 will have a brown mark on the side, and is 0.014-0.018mm less than 40mm id

03 is yellow and 0.006-0.010. and is the same as a grade 2 stock bearing. look in the 4age manual for clerances and bearing sizes

[kingcorolla]

um, yea thats the numbers on the box. Just those.

they have no 01, 02 etc, maybe because they both are standard size?

just seem strange that the last number (on the boxes) are different, yet the same part.

[vvega]

nah just diffent numbering
my guess is on them been differbt sizes
and no you cant tell without soe good equipment

v

[Mr Revhead]

unless you look on the side and can see the colours...

[vvega]

good point there revhead

[kingcorolla]

no colours here brutha.

both sets slot into the tunnels alright, and both measure up the same on the calipers, but thats not exactly expensive eqipment, aye vvega.

[ChaosAD]

The bearings themselves should have a colour on them.
en with micrometers it would be hard to tell the diference

[Mr Revhead]

yup on the side of the shells.

and yup the difference is stuff all