2 1/4inch ae111 blacktop exaust- wot resontors?

[phatman3801]

hey im getting a 2 1/4 inch mandrel bent exasut made for my ae111 levin wif a blacktop its going from the extractors back, ive done a search and frm wot a gather ill need 2 coby resantors but the questions is wot cobys do i go for??? i want it loud but i want nice deap sounding loud not that crap rasp sound! its having a 4 inch n1 stype muffler tip on the end, ive been told 2 16inch cobys welded together stright after the extractors should work, part number: MLC16, will these be the ones i want and where i want them???
ne thoughts will b great cheerz

[ChaosAD]

Why exactly do u want it loud?

[CozmoNz]

get as long as you can.. 18" or longer if you can.

2 of them... and i suggest you use a *normel* muffler, not a big can like mine... and many others on these forums... with them you can either have it quite loud, or quiet... id rather have it in the middle to be honest... if i could do it again, id probbaly use a trd muffler (if it was cheap enough ), or just a run of the mill one, with a 2 and a quarter in and outlet.

[phatman3801]

well yea not real loud but loud enough to have that nice deap sound

[CozmoNz]

Those cans sound pretty good at idle.. problem is, oh thats without a silencer btw, but problem is, once its revving above 3k rpm... it gets a little *cop magnet material*... above 5 and you really start o draw attention..

keep going and well, noise is basically the same.... giant bumble bee

but she sounds mint down low now

[phatman3801]

so 2 18inch ones then? 16inch to short?

[bad20v]

I run a cat-back ( gutted witha straight through pipe welded through it ), exhaust, 54mm mandrel bent piping to a N1 style muffler. I still use the factory resonator which gives it a better tone. Its a little loud but the muffler has a 30mm centre silencer which cuts out alot of noise. I have it fitted around town and then remove it for track days. The factory resonator is about 18" long, so something about the same size should work quite well.

[CozmoNz]

if you dont want that rasp, and want a more deep tone, as many and as long as you can fit.

im told you can only fit 2 18" ones under there, but with a bit of thinking and mucking around, (welding them closer) i reackon you could fit 3.

[boyracer69]

if you dont want that rasp, and want a more deep tone, as many and as long as you can fit.

im told you can only fit 2 18" ones under there, but with a bit of thinking and mucking around, (welding them closer) i reackon you could fit 3.

yer id prob go with 3, i have no cat, and 2 resinators and then the bigbore (with the silencer removed -was crap with it) and its $&#$% loud. Got fined for it and yeah, but i reckon it sounds damn mint

[AceSniper]

you can fit a 19" after the bend from the factory res, so im sure if u wanted you could fit another before the factory

[quinny]

got a 22 and a 16 cobys and with a big can you will fail wofs and but it will sound the biz

[phatman3801]

i think im gunna got with 2 19inch cobys with expantion chambers, ill just get them welded together and have them right after the extractors, that a good idea?

[CozmoNz]

i dont think it makes much difference... you could try at the header end then the back end... and see what difference it does make, but seriously, only you would notice the difference .

[thaphatty]

nah man, just cut a 10cm diameter hole in your first muffler

[bad20v]

nah man, just cut a 10cm diameter hole in your first muffler

Yeah bro, give it that phat 'tractor' sound.

[Jebus]

Im making mine up at the moment 2 1/4" with a 10" louvered coby, a 2 chamber Flowmaster and a 6" big bore dumpy. Hopefully thatll keep it quiet and sound nice.

[Bling]

6" big bore dumpy on an ae111?

[phatman3801]

lmao!!! well that would be prrty orignal!:P

[Jebus]

Heh, my bad. Its on a KE30, but ts 4age still.