FWD and 4wd wheel offsets

[diss7]

What is the typical offset for an 8 inch wheel on a front wheel drive?
Just checked out my my partners Glanza, which has a 7.5 inch rim, and the only markings that could be taken as possibly being an offset were 29, and 66. But I doubt whether either of these are correct.

And similiar question. What sort of offset does a Celica/Caldina and a WRX take for a 5x100 wheel; similar to each other or completly different? Again for an 8 inch wheel.

Thanks

[diss7]

Does no one know?

[evil_si]

im running an offset of 45 on my corona with a 7.5" rim, the wheels were designated for a subaru 4wd but work sweet

[JT]

29 is quite likely to be the offset of the rims on the glanza. Any lower and the wheel would probably be rubbing on the strut being 7.5" wide.

[diss7]

Its not 29, you can see visually that doesnt stick out like a+29 would.
Ahwell
Cheers anyway.

[Ae92typeX]

http://www.rsracing.com/tech-wheel.html#backspace

use that link, it explains how to measure your offset easy enough; also has a quick refference chart which may help.

[aesc]

On my AE101 ive got 17 x 7.5's with 40 offset and the only just clear the rear strut by 1-2mm. And with a very heavy load they occasionally scrape on the guards too.

I think you might be pushing to fit 8" rims on a FWD like a glanza

[QikStarlie]

they should be around 40 for a glanza. my starlet has 40 not much room on either side. think standard wheels are 35 or 38??