Toyspeed.org.nz Message Board

by **crispy'86** » Mon Oct 10, 2005 5:57 pm

Does anyone know the part numbers for the ecu's from a 20v manual and auto ae101?? I have someone with one but he's not sure if the ecu is off an auto or manual.
Any help greatly appreciated

by **sergei** » Mon Oct 10, 2005 7:41 pm

There are a few different part numbers for a manual ecu off ae101, best thing is just tell by plugs, auto has different plugs from manual:
Manual: 12 pin plug, 16 pin plug and 26 pin plug.
Auto: 16 pin plug, 26 pin plug and 22 pin plug.

by **AceSniper** » Mon Oct 10, 2005 8:10 pm

if it still has the numbers attached on the sticker... it will say A/T for auto or M/T for manual

by **mrcarter** » Tue Oct 11, 2005 12:41 pm

cheers crispy,the plugs shud do it,thats the prob when ya have a big box full of various ecu's,and an even bigger box of looms,if im still too stupid to work it out i'll go down to toyota with all my ecu's and get them to find it :lol:

by **crispy'86** » Wed Oct 12, 2005 12:48 pm

did you get my pm??? I got the part numbers from Mr Revhead , let me know if u got that one

They are pretty much interchangable

by **Mr Revhead** » Wed Oct 12, 2005 1:54 pm

take note of the plugs though.... thats something i forgot.
you cant plug an auto ecu into a manual loom, but you can run an auto ecu as a manaul (like when doing manual conversion)

heres the pinouts:

http://www.turbocorolla.com/tech/images/20v_silvertop_pinouts.doc

by **crispy'86** » Sun Oct 23, 2005 6:39 pm

Thanks for your help people, this should give me some progress with sourcing one

Toyspeed.org.nz Message Board

AE101 20V ECU question

AE101 20V ECU question

ecu

Who is online