Seats into a TE71

[fuel]

I'm just wondering, what seats can I bolt into my TE71 Corolla? I don't want to mess around with fabricating custom mounts - so just wanting to know if say AE82 or AE92 FX-GT/Levin/Trueno etc seats will bolt into my TE71.

Someone told me the TE71 shares the same floorplan as the AE85/AE86 - is this true? If that's the case then what seats have been put into an 85/86 with ease?

Cheers.

[Zak]

I think MR2 seats should fit with out too much trouble, you might have to re-drill it abit or some thing, but relitively easy compared to changing rails and stuff

[pervert]

It should be the same floorplan as a KE70/AE86 etc.

SW20 MR2 seats fit, but they are NOT direct bolt in like people may say. The inside rails need the ends cut off, and re-welded on, at a slightly different angle.

I couldn't find anything that would bolt it, most nice seats are from FWD's, and they don't allow for the transmission tunnel, so don't bolt in...

[fuel]

Gutted. What about the older 80s Celica Supras?

It will be hard trying to find some decent AE86 seats for a good price.

[pervert]

The MR2 ones are good seats, if you know anyone with a welder and an angle grinder, they could do it, it's real basic stuff...

Get a measuring tape, and measure the distances between the mounting points, then go to a wrecker, they usually have a room full of seats. Just measure them up, and try and get something that is real close.