Bodykits?

[iforgothowtodrive]

where do you get bodykits done in dunaz only place i know of is fibreglass creations

[barryogen]

where do you get bodykits done in dunaz only place i know of is fibreglass creations

custom or off the shelf?
off the shelf, just have a look online, find one you want, and order it... any trained monkey should be able to fit it without much effort, although I'd get a paint and panel place to do it while they're matching the paint for it.

[Mr.Phreak]

Some off the shelf kits are pretty crap, and would baffle alot of monkeys.

As a general rule, the less you pay for the kit, the more you'll pay to fit it.

[iforgothowtodrive]

hmm good question i dont know i shall ponder that as i dont really want a kit thats on sumone elses car i would rather have orignal but off the shelf seems cheap

[CozmoNz]

considering geniune veilside is technically "off the shelf"... not all of it is cheap .

You get what you pay for.

Why do you want a bodykit anyway

[iforgothowtodrive]

cos i hate the one i have plus now that i have taken the spoiler off the ass end looks too high off the ground and needs to look lower that and the front kit has millions of stone chips the scratch on the front right side from when i bought it and i hate the round fog lamps so i figured hey just get a new kit and ya dont have to worry bout it anymore as for the side skirts i hate the fact that they crawl up towards the back

[EVL GSXR]

where do you get bodykits done in dunaz only place i know of is fibreglass creations

custom or off the shelf?
off the shelf, just have a look online, find one you want, and order it... any trained monkey should be able to fit it without much effort, although I'd get a paint and panel place to do it while they're matching the paint for it.

Ha ha ha ha ha ha ha ha ha ha yes you would be correct in one thing anyone can put a Kit on but not anyone can do a good job of it!! Most Kit's aren't just a matter of bolting them up alot are wrapped, twisted, don't line up etc.. So if you want a decent job done then pay's to go some where decent and pay the money..

[iforgothowtodrive]

not to sound really callous and sum what similar to a bitch but............................. duhhhhhhh ohhhhhhhhhhhhhh ahhhhhhhhhhhhh thats what im posting for aye

[Alex B]

Look at it this way, a genuine kit (toms velside etc) will be expensive, but should be a prety darn good fit, buy a cheepy you will pay a shit load for molding etc, and custom is well expensive...

[Mr.Phreak]

C'mon guys, she's asking where to get it/get it done in Dunedin, not really what kind of kit to get, my comment was mainly in response to Barry's

[Alex B]

Well in responce to her question, not alot of places, not a huge demend for that service with 100,000 full time residance.

[AJz]

C'mon guys, he's asking

she actually

[Mr.Phreak]

Meh, point still stands

[SkylineObsession]

Personally i'd go to Christchurch or somewhere to get it done as Dunedin places (of which there probably aren't many at all) don't seem to last long and probably wouldn't do as good a job as other places.

See: Petes' GTS-t's coupe taillight conversion...

[EVL GSXR]

not to sound really callous and sum what similar to a bitch but............................. duhhhhhhh ohhhhhhhhhhhhhh ahhhhhhhhhhhhh thats what im posting for aye

I wasn't aiming at you Holly ..
And if you read your post it sound like your asking WHERE to get a Kit from as most replies are where to get them from
If you want a good job done on getting a Kit fitted go see Dave at ABFX
he done Chris's Wide Body Civic and done a bloody good job.. He has done alot of Kit fitting and Customizing..

[barryogen]

where do you get bodykits done in dunaz only place i know of is fibreglass creations

custom or off the shelf?
off the shelf, just have a look online, find one you want, and order it... any trained monkey should be able to fit it without much effort, although I'd get a paint and panel place to do it while they're matching the paint for it.

Ha ha ha ha ha ha ha ha ha ha yes you would be correct in one thing anyone can put a Kit on but not anyone can do a good job of it!! Most Kit's aren't just a matter of bolting them up alot are wrapped, twisted, don't line up etc.. So if you want a decent job done then pay's to go some where decent and pay the money..

I've only ever come across decent ones that fit "right out of the box", and I was the monkey I was referring to

[EVL20V]

y not just dump it on adjustables and dont have to worry about ripping up ur kit

ps: any1 got pervert's cell?

[AJz]

na he was too cool to give it out on here

[Lloyd]

I'm sure a select few of us actually got it though

Why do you need it?

[iforgothowtodrive]

y not just dump it on adjustables and dont have to worry about ripping up ur kit

ps: any1 got pervert's cell?

funny i could of sworn i wrote a reason already....

cos i hate the one i have plus now that i have taken the spoiler off the ass end looks too high off the ground and needs to look lower that and the front kit has millions of stone chips the scratch on the front right side from when i bought it and i hate the round fog lamps so i figured hey just get a new kit and ya dont have to worry bout it anymore as for the side skirts i hate the fact that they crawl up towards the back