removing wheel bearings
Moderator: The Mod Squad
5 posts
• Page 1 of 1
removing wheel bearings
by TRD001 » Tue Jan 03, 2006 8:10 pm
Im trying to remove 2 from the front brakes assembly, anyone got any idea's because im stumped.?
The big secret in life is that there is no big secret. Whatever your goal, you can get there if you're willing to work.
-
TRD001 - Toyspeed Member
- Posts: 94
- Joined: Tue Apr 19, 2005 11:28 pm
- Location: Auckland
by gordon77 » Tue Jan 03, 2006 11:33 pm
HRT wrote:Hammer and a punch. Go nuts
if that doesnt work you need a hydraulic press... take the hubs to a wheel place and get them to press it out and press the new ones in (if thats what you are doing) i had to gas ax the race off mine
What is RR?
-
gordon77 - Toyspeed Member
- Posts: 755
- Joined: Sun Dec 15, 2002 5:07 pm
- Location: Garage RR
by Caveman » Wed Jan 04, 2006 1:55 am
I did this yesterday. Its such a messy job without the right tools i.e. press and/or puller.
Had to grind both a shell off, that was trickey without damaging the stub axle, basically a lot of bashing and heating the hub/freezing the new bearing shell for the rest
Had to grind both a shell off, that was trickey without damaging the stub axle, basically a lot of bashing and heating the hub/freezing the new bearing shell for the rest
-
Caveman - Toyspeed Member
- Posts: 1918
- Joined: Sun Sep 12, 2004 11:20 am
- Location: West Auckland
by TRD001 » Wed Jan 04, 2006 12:44 pm
Sorted Toyota airport are going to pull bith out for $60 bucks
I consider that a good price.
I consider that a good price.
The big secret in life is that there is no big secret. Whatever your goal, you can get there if you're willing to work.
-
TRD001 - Toyspeed Member
- Posts: 94
- Joined: Tue Apr 19, 2005 11:28 pm
- Location: Auckland
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 11 guests